NEC M46B-AVT User Manual

Also see for M40 - MULTEOS - 40" LCD TV: Specifications Specifications User manual Features and benefits Manual

Contents

NEC M46B-AVT User Manual Manual pdf 29 page image

EnglishEnglish-25Power IndicatorMode Status Indicator LightPower ON Green*2Power OFF (ECO STANDBY)*Power consumption under 1WRedPower OFF (STANDBY)Power consumption under 4WAmberPower Save Amber BlinkingPower Standby when“SCHEDULE SETTINGS”enabledGreen and Amberblink alternatelyDiagnosis (Detecting faiure) Red Blinking(See Trouble Shooting page 40)*When in Eco Standby Mode RS-232C controls do not function.*2 If "OFF" is selected in POWER INDICATOR(See page 30), the LED willnot light when the LCD monitor is active mode"Power ManagementThe LCD monitor follows the VESA approved DPM PowerManagement function.The power management function is an energy saving func-tion that automatically reduces the power consumption ofthe display when the keyboard or the mouse has not beenused for a fixed period of time.The power management feature on your new display hasbeen set to the “ON” mode. This allows your display to entera Power Saving Mode when no signal is detected. This couldpotentially increase the lifetime of the display while powerconsumption is decreased.STANDBY mode is used when the display is connected to anRS-232C cable or when using the INPUT DETECT function.ECO STANDBY uses less power, but the RS-232C andINPUT DETECT functions are not available.Picture SizeThe size of the picture can be changed depending on theaspect ratio (4:3, 16:9, etc.) of the input signal.Picture ModeChoose the Picture Mode that is most suitable for the type ofcontent that is shown.Standard: for imagessRGB: For text based applications.Highbright: for moving imagesCinema: for moviesSTANDARD sRGB HIGHBRIGHTSTANDARD CINEMA HIGHBRIGHTDVI, VGA,RGB/HV, OPTIONHDMI, DVD/HD,VIDEO, TVInformation OSDThe Information OSD provides information such as: Moni-tor ID, Input Source, Picture Size, etc. Press the DISPLAYbutton on the remote to bring up the Information OSD.Basic Operation - continuedSignal Type4:3NORMAL SIZE RECOMMENDED SIZENORMALZOOM(DYNAMIC)FULLWIDESqueezeLetterboxDVI, VGA, RGBH/V, OPTION FULL ZOOM NORMALFULL WIDE ZOOM NORMALHDMI, DVD/HD, VIDEO, TV1 ID number assigned to current monitor* 32 ID number assigned monitor to be controlled via RS-232C* 43 Input Source4 Audio input mode5 Picture size6 Input Signal Information7 Sub picture information*3: “IR CONTROL” should be set “Primary” or “Secondary”.*4: “IR CONTROL” should be set “Primary”.