NEC M46B-AVT User Manual

Also see for M40 - MULTEOS - 40" LCD TV: Specifications Specifications User manual Features and benefits Manual

Contents

NEC M46B-AVT User Manual Manual pdf 34 page image

English-30OSD Controls - continuedOSD TURN OFF Turns off the OSD after a period of inactivity. The preset choices are 10-240 seconds.OSD POSITION Determines the location where the OSD appears on the screen.UPDOWNLEFTRIGHTINFORMATION OSD Selects whether the information OSD is displayed or not. The information OSD will bedisplayed when the input signal or source changes. The information OSD will also givea warning when there is no-signal or the signal is out-of range.An interval between 3 to 10 seconds for the Information OSD to appear is avaiable.MONITOR INFORMATION Monitor Information.OSD TRANSPARENCY Set the transparency level of the OSD.OFFTYPE1TYPE2OSD ROTATION Determines the OSD display direction between landscape and portrait.LANDSCAPEPORTRAITDisplay the OSD with landscape mode.Display the OSD with portrait mode.OSD RESET Resets the following settings within the OSD menu back to factory setting:OSD TURN OFF, OSD POSITION, INFORMATION OSD, and OSD TRANSPARENCY.MULTI DISPLAY MONITOR ID Sets the monitor ID number from 1-26.IR CONTROL Selects the mode of the monitor for use with the infra-red remote control when usingthe RS-232C daisy chain.NORMALPRIMARYSECONDARYLOCKThe monitor will be controlled normally by wireless remote controller.Choose “PRIMARY” for the first monitor within an RS-232C daisy chain.Choose “SECONDARY” for all subsequent monitors within an RS-232C daisy chain.Prevents the monitor from being controlled by wireless remote controller. To return tonormal operation, press the “DISPLAY” button on the remote controller for 5 seconds.TILE MATRIX Allows one image to be expanded and displayed over multiple screens (up to 25) through adistribution amplifier.H MONITORSV MONITORSPOSITIONTILE COMPENABLENumber of monitors arranged horizontally.Number of monitors arranged vertically.Select which section of the tiled image to be displayed on the monitor.Turns the TILE COMP feature on.Enables Tile Matrix.POWER ON DELAY Adjusts the delay time between being in “standby” mode and entering “power on” mode.“POWER ON DELAY” can be set between 0 and 50 seconds.POWER INDICATOR Turns on or off the LED located on the front of the monitor. If "OFF" is selected, the LED willnot light when the LCD monitor is active mode.MULTI DISPLAY RESET Resets the following settings within the MULTI DISPLAY menu back to factory setting:MONITOR ID, IR CONTROL, TILE MATRIX, POWER ON DELAY.DISPLAYPROTECTION POWER SAVEAll inputs except for TVSets how long the monitor waits to go into power save mode after a lost signal.Note: When connecting DVI, video card might not stop sending digital even if image hasdisappeared. In this case the monitor does not got to power management mode.STANDBY MODE Lowers power consumption.Note: RS-232C Function is lost when in Eco Standby mode.