NEC MD242C2 Installation And Maintenance Manual

Also see for MD242C2: Installation & maintenance guide

NEC MD242C2 Installation And Maintenance Manual Manual pdf 18 page image

English-16OSD COLORAdjusts the color of the OSD Menu. “Tag window frame color”, “Item select color” and “Adjust window frame color” canbe changed to Red, Green, Blue, or Gray.FACTORY PRESETSelecting Factory Preset allows you to reset all OSD control settings (LUMINANCE, IMAGE CONTROL, PICTUREMODE, SHARPNESS, OFF MODE, OSD LEFT/RIGHT, OSD UP/DOWN, OSD TURN OFF) back to the factorysettings. Individual settings can be reset by highlighting the control to be reset and pressing the RESET button.InformationProvides information about the current resolution display and technical data including the preset timing being used andthe horizontal and vertical frequencies. Indicates the model name and serial number of your monitor.OSD WarningOSD Warning menus disappear by pressing the EXIT button.NO SIGNAL: This function gives a warning when there is no Horizontal or Vertical Sync. After power is turned on orwhen there is a change of input signal, the No Signal message window will appear.OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. After poweris turned on or there is a change of input signal or if the video signal doesn’t have proper timing, the Out Of Rangemessage window will appear.BACKLIGHT LIFETIME: At 1000/500/0 hours of estimated remaining backlight lifetime, a warning message will bedisplayed. Please contact your supplier when this warning message is displayed.LUMINANCE WARNING: This warning indicates that the monitor cannot keep user set luminance levels. Pleasecontact your supplier when this warning message is displayed.If you need detailed information about the controls, please refer to the ADVANCED OSD menu.