NEC MD304MC - MultiSync - 29.8" LCD Monitor Installation And Maintenance Manual

Also see for MD304MC - MultiSync - 29.8" LCD Monitor: Specifications Specifications Specifications Specifications

Contents

English-10ControlsOSD (On-Screen Display) control buttons on the front of the monitor functionas follows:To access OSD menu, press the MENU button.To change signal input, press the SELECT button.NOTE: OSD must be closed in order to change signal input.* The “LEFT/RIGHT” and “UP/DOWN” buttons functionality is interchangeable depending on the orientation(landscape/portrait) of the OSD.SETTING OSD LANGUAGE• Set the OSD language before using OSD functions.• To access the “LANGUAGE SELECTION” menu, press control key (LEFT/RIGHT or UP/DOWN or EXIT).• Press the LEFT/RIGHT or UP/DOWN buttons to select the desired OSD language.• To exit from this OSD menu, press EXIT button.NOTE: Setting the OSD language is only necessary upon initial setup. The OSD language will stay the same until changedby the user.Detects the level of ambient light, allowing the monitor to make adjustments to varioussettings, resulting in a more comfortable viewing experience. Do not cover this sensor.Turns the monitor on and off.Indicates that the power is on.Can be changed between blue and green in the Advanced OSD Control menu.Enters the OSD Control menu. Enters OSD sub menus.Changes the input source when not in the OSD Control menu.Access OSD menu. Exits the OSD sub menu. Exits OSD Control menu.Navigates to the left or right through the OSD Control menu. You can adjust the brightnessdirectly, while the OSD menu is off. The HotKey function is enabled by default.Navigates up or down through the OSD Control menu. You can adjust the contrast directly,while the OSD menu is off. The HotKey function is enabled by default.Resets the OSD back to factory settings.When pressed when the OSD is not showing, rotates the OSD Control menu betweenportrait and landscape mode (Page 23, Tag9 “OSD ROTATION”).*The Key Guide appears on screen when the OSD control menu is accessed.The Key Guide will rotate when the OSD control menu is rotated.1 AUTO DIMMING SENSOR2 POWER3 LED4 INPUT/SELECT5 MENU/EXIT6 LEFT/RIGHT7 UP/DOWN8 RESET/ROTATE OSD9 KEY GUIDE1 2 3 4 5 6789LandscapePortrait