NEC MD304MC - MultiSync - 29.8" LCD Monitor Installation And Maintenance Manual

Also see for MD304MC - MultiSync - 29.8" LCD Monitor: Specifications Specifications Specifications Specifications

Contents

English-22Response Improve Turns the RESPONSE IMPROVE function on or off. Response Improve may reduceblurring that occurs in some moving images. When Response Improve is on, responsetime is improved.Side Border Color Adjusts the side black bars color between black and white. For wide aspect monitors.LED Brightness Controls the brightness of the LED on the monitor.LED Color The LED on the front can be blue or green.UNIFORMITY This function electronically compensates for the slight variations in the white uniformitylevel as well as for deviations in color that may occur throughout the display area of thescreen. These variations are characteristic of LCD panel technology. This functionimproves the color and evens out the luminance uniformity of the display. Settings from1 to 5 are available. 1 is the lowest amount of compensation and 5 is the highest.NOTE: Using the UNIFORMITY feature does reduce the overall peak luminance of thedisplay. If greater luminance is desired over the uniform performance of the display, thenUNIFORMITY should be turned off.UNIFORMITY Level Select the level for UNIFORMITY adjustments.Tag8 Language OSD control menus are available in eight languages. Press “Left” or “Right” to select.OSD H. Position You can choose where you would like the OSD control image to appear on your screen.Selecting OSD Location allows you to manually adjust the position of the OSD controlmenu left or right.OSD V. Position You can choose where you would like the OSD control image to appear on your screen.Selecting OSD Location allows you to manually adjust the position of the OSD controlmenu up or down.OSD Turn off The OSD control menu will stay on as long as it is use. You can select how long themonitor waits after the last touch of a button to shut off the OSD control menu.The preset choices are 10-120 seconds by 5 seconds step.OSD Lock Out This control completely locks out access to all OSD control functions. When attemptingto activate OSD controls while in the Lock Out mode, a screen will appear indicating theOSD controls are locked out.There are three types of OSD LOCK OUT:OSD LOCK OUT with BRIGHTNESS and CONTRAST control: To activate the OSD LockOut function, press SELECT, then “UP” button and hold down simultaneously. Todeactivate the OSD Lock Out, press SELECT, then “UP” button and hold downsimultaneously while in the OSD menu. BRIGHTNESS and CONTRAST can be adjustedwhile in the lock out mode.OSD LOCK OUT with no control: To activate the OSD Lock Out function, press SELECT,then “Right” button and hold down simultaneously. To deactivate the OSD Lock Out, pressSELECT, then “Right” button and hold down simultaneously while in the OSD menu.No controls can be adjusted while in the lock out mode.OSD LOCK OUT with BRIGHTNESS (only) control: To activate the OSD Lock Outfunction, press SELECT, then “Down” and “Left” buttons and hold down simultaneously.To deactivate the OSD Lock Out, press SELECT, then “Down” and “Left” buttons and holddown simultaneously while in the OSD menu. BRIGHTNESS can be adjusted while in thelock out mode.CUSTOM: Press RESET and EXIT to enter the CUSTOM Menu. Select ENABLE orDISABLE for POWER KEY, INPUT SEL, HOT KEY (BRIGHTNESS/CONTRAST), ECOMODE, WARNING (RESOLUTION NOTIFIER/OSD LOCK OUT). To Deactivate the OSDLock Out function, press RESET and EXIT to bring up the LOCK OUT warning.Press SELECT, SELECT, LEFT, RIGHT, LEFT, RIGHT, EXIT.OSD Transparency Adjusts the transparency of the OSD MENU.OSD Color “Tag window frame color”, “Item select color” & ”Adjust Window frame color” can bechanged.BOOT LOGO The NEC logo is briefly displayed after the monitor is powered on. This feature can beturned on or off in the OSD.Note: If the “EXIT” button is kept pressed while NEC logo is displayed, the BOOT LOGOmenu will appear. It is possible to change the BOOT LOGO setting to OFF.Signal Information Signal information can be displayed in the corner of the screen.Signal information is either “On/Off”.Resolution Notifier The optimal resolution is 2560 x 1600. If ON is selected, a message will appear on thescreen after 30 seconds, notifying you that the resolution is not set to 2560 x 1600.Press “Left” or “Right” to select.