NEC MDview 243 User Manual

Also see for MDview 232: Manual User guide

English-18Tag2 SHARPNESS This is a digital capability for keeping a crisp image at all signal timings. It continuouslyadjusts to maintain as distinct or as soft image as you prefer, and is set independentlyaccording to different timings. Press “Left” or “Right” to adjust.RESPONSEIMPROVETurns the Response Improve function on or off. Response Improve may reduce blurringthat occurs in some moving images.ECO MODE Decreases the amount of power consumed by reducing the brightness level.OFF: No function.MODE1: Decreases the brightness range up to about 160 cd/m2 (MDview 232).Decreases the brightness range up to about 200 cd/m2 (MDview 243/272).MODE2: Decreases the brightness range up to about 100 cd/m2.AUTO BRIGHTNESS Auto Brightness has three settings.“OFF” is recommended for best color reproduction.OFF: No function.ON: Adjusts the brightness automatically, by detecting the brightness level of yourenvironment and adjusting the monitor with the best BRIGHTNESS setting*1.*1: Please refer to Page 32 for full “Auto Brightness” information.NOTE: Do not cover environmental brightness sensor (AUTO DIMMING sensor).METAMERISM Improves the white point color matching when the display used side-by-side with astandard gamut display monitor. This feature compensates for the way the human eyeperceives colors slightly differently compared to the scientifi c instrument used to adjustthe display during calibration.AMBIENT LIGHTCOMP.Luminance setting depends on ambient light compensation.Mostly affects black reproduction.NOTE: AUTO DIMMING SENSOR measures ambient brightness when power is on andaffects image and color quality settings.Note: Not recommended for use in Medical Environment, as contrast levels will changeand decrease the reproduction quality of DICOM images.6 - AXIS ADJUST HUE: Adjusts the hue of each color*1 . The change in color will appear on screen and themenu color bars will show the amount of adjustment.SATURATION: Adjusts the color depth of each color*1 . Press the “RIGHT” button and thecolor vividness increases.OFFSET: Adjusts the color brightness of each color*1 . Press “RIGHT” button and thecolor Brightness increases.*1: RED, YELLOW, GREEN, CYAN, BLUE and MAGENTA.SHORTCUTCUSTOMYou can select the PICTURE MODE which are displayed in PICTURE MODE shortcutmenu.Tag3 R-H.position* 1(Analog input only)Adjusts the position of the red component of the image.Press “Left” or “Right” to adjust.G-H.position*1(Analog input only)Adjusts the position of the green component of the image.Press “Left” or “Right” to adjust.B-H.position*1(Analog input only)Adjusts the position of the blue component of the image.Press “Left” or “Right” to adjust.R-FINE*1(Analog input only)Adjusts the “FINE” setting of the RED component of the image.Press “Left” or “Right” to adjust.G-FINE*1(Analog input only)Adjusts the “FINE” setting of the GREEN component of the image.Press “Left” or “Right” to adjust.B-FINE*1(Analog input only)Adjusts the “FINE” setting of the BLUE component of the image.Press “Left” or “Right” to adjust.R-SHARPNESS*1(Analog input only)Adjusts the sharpness of the red component of the image.Press “Left” or “Right” to adjust.G-SHARPNESS*1(Analog input only)Adjusts the sharpness of the green component of the image.Press “Left” or “Right” to adjust.B-SHARPNESS*1(Analog input only)Adjusts the sharpness of the blue component of the image.Press “Left” or “Right” to adjust.DVI Long Cable(DVI input only)Compensates for image degradation caused by using a long DVI cable.There are 4 possible settings, with “0” being the lowest level of compensation and “3”being the highest level. The default setting is “1”.*1 MDview 232/243 only.