Using the MobilePro 4-52. Tap the desired selections to automatically turn on the backlighteither while on battery power or when connected to an AC powersource.Using auto-on while on battery powersubstantially reduces battery life.Enabling the Suspend SwitchYou can configure your MobilePro to power on or off by simplyopening or closing the display cover. The suspend switch acts as aswitch for both the power and the display panel.With the suspend switch enabled:! Opening the MobilePro powers on the unit. To power on the unitwhile it is open, use the Power button.! Closing the MobilePro powers off the unit and insures that thebacklight is off as well.Follow these steps to enable the suspend switch.1. Tap Start, Settings, then select Control Panel.2. Double tap the MobilePro Settings icon to launch the dialog box.Be sure to select the “LCD Suspend/Resume” tab.3. Select either “Enable suspend while on Battery Power” or “Enablesuspend while on External Power,” or both, to enable the displaylinkage switch.While running on battery power, your NECMobilePro will not automatically suspend during synchronization unlessthe battery charge is at a very low status. You may want to connectyour MobilePro to an AC power source before synchronizing with yourhost PC.
