NEC MP-01 User Manual

Also see for MP-01: Quick reference guide Quick reference guide

Contents

NEC MP-01 User Manual Manual pdf 5 page image

5• Memory card• Memory card cover• Wireless remote control• AA batteries x 2• Wireless remote control extensioncable• Double sided tape (for Wireless remotecontrol extension cable)Contents• Video signal cable (DVI-D-DVI-D)• Audio cable• USB cable extension• Bracket x 2• Power Cord• AC adapter (DXW1225N-S0068Z)• Set up guide• CD-ROM (User’s Manual & software)Terminal panelSDPOWER RESET VIDEO IN DVI USB LAN RS232AUDIOINAUDIOOUT1 2 3 4 5 6#@!09871DC IN connectorConnect the enclosed AC adapter.2Memory card connectorSet the enclosed memory card.3S-VIDEO IN connectorConnect with video devices, such as DVD players, and movies fromvideo devices can be placed with messages and still images.Use an S video cable (available in stores).4Power IndicatorPower button ON: Green light turns onPower button OFF: Green light flashes then red light turns on5Remote control sensorThis is the light receiving part of the signal from the wirelessremote control.6Wireless remote control extension connectorIn cases such as when the remote control sensor is hidden behindthe liquid crystal display, connect the enclosed wireless remotecontrol extension cable.Secure the light receiving end of the wireless remote controlextension cable in a position from which remote control operationis possible using the enclosed double-faced adhesive tape.7Reset buttonThe main body is reset. Even if the reset button is pressed, the data inthe memory card will not be erased.8AUDIO INWhen using the S-VIDEO IN connector, this is connected tothe audio output from a video device.9AUDIO OUTThis is connected to the AUDIO IN of the liquid crystal display.0DVI OUTThis is connected to the DVI input connector of the liquidcrystal display.!USB memory connectorThis is used when distributing program data via USB memoryor when updating internal firmware.If it is difficult to use the connector for USB memory due tothe location installed, use the enclosed USB cable extension.@LAN connectorThis is connected to the LAN cable when distributing programdata via LAN.#External connectorTerminal used for maintenance.Cannot be used.