8Connection and settingWhen using LAN, after finishing the “Connection/Setting” in this chapter, refer to the “LAN Connection/Setting” (page 16).PreparationIn order to use the Media Player to display the program on the Display, the enclosed authoring software, a computer, and a USB memory(if the program is distributed using USB memory ) are required.Authoring softwareThe authoring software is on the enclosed CD-ROM. Install the authoring software on your computer when using it for the first time. Refer to theauthoring software User’s Manual for the installation procedure.USB memoryEncoded USB memory cannot be used.Connection when using USB memory to distribute programs1. Remove the screw from the mounting hole for the memory card cover.2. Insert the attached memory card into the memory card connector.CAUTION:Insert the memory card with the label side down. Check to make Sure that the write protect switch in riot in the look position.3. Attach the memory card cover with the screw that was removed from the main body.4. Insert a USB cable extension into the USB connector.(When the program is distributed using a USB memory )