NEC MT1030+ User Manual

NEC MT1030+ User Manual Manual pdf 11 page image

11Top Features1 Power ButtonUse this button to turn the power on and off when the Main Power Switch is on andthe LCD projector is in standby.2 Menu ButtonDisplays the on- screen menu.3 Select (stß ©) / (+)(–) ButtonsSelect: After you press the “Menu” button, use the s or t button to select themenu icon of the item you wish to adjust.(+)(–): Use these buttons while you' re in the Image Adjust mode to change thelevel of a selected menu item. These buttons are also used to set an itemin the Power or Settings menus.4 Enter ButtonExecutes your menu selection.5 (+) (–) Zoom ButtonsPress the (+) button to make the image larger; press (–) to make the image smaller.6 (+) (–) Focus ButtonsPress the (+) or (–) buttons to focus an image.7 Power IndicatorWhen this indicator is green, the LCD projector is on; when the indicator is amber, itis standing by.8 Status IndicatorWhen this is lit red continually, it's warning you that the projection lamp has exceed2000 hours of service. After this light appears, it is advisable to replace the projectionlamp as soon as possible.(See pages 83 and 84)In addition the message "LAMP USAGE XX HOURS" appears continually whenthe on-screen menu is not displayed.If this light blinks red rapidly, it indicates that either the lamp cover or filter cover isnot attached properly. See the Status Light Messages on page 91 for more details.INTRODUCTION1920MENUSELECTENTERON/OFFZOOM FOCUSSTATUSPOWER–+–+–+23465187(stß ©)