NEC MT1030+ User Manual
                                                       | |
Contents
| 
39Using the Viewer functionIf you use the Viewer function on the LCD projector, you must firstinstall the optional MT Viewer board (VK-MT) in the LCD projectorand set up the exclusive software included with the VK-MT kit.See the user's manual included with the VK-MT for installing anduninstalling the software.Mounting the Optional MT Viewer BoardTo install the Viewer board:1. Set the LCD projector on end with the carrying handle up.NOTE: Be sure to unplug the LCD projector before installing the Viewer board.2. Remove the two screws from the bottom.3. Remove the slot cover by pushing up on the catch of the coverwith a flat-head screwdriver until you feel it detach.4. Insert the optional viewer board into the slot. Be sure to push theboard until the board is securely fitted.5. Secure the board in place with the two screws that you removed instep 2.6. Put the LCD projector back in the original position.7576OPERATION |
Related manuals for NEC LCDMT1035
manualsdatabase
Your AI-powered manual search engine