NEC MULTISYNC LCD1800TM User Manual

Also see for MultiSync LCD1800: Specifications User guide Brochure & specs Product dimensions

Contents

NEC MULTISYNC LCD1800TM User Manual Manual pdf 12 page image

- 1-9 -ENGLISH- +- +Adjust by pressing orbutton.Select the item icon on SubMenu by pressing button.Turn on the monitor.Press or to display theOSM screen.Select the group icon on MainMenu by pressing .Sub MenuMain MenuThe monitor has an OSM (On Screen Manager) function.The following procedure shows how to adjust the screenwith using the OSM function.How to Adjust the ScreenIf you don't press any button for approximately 30 sec-onds, the OSM screen will disappear. Or press OSD OFFbutton, then the OSM screen will disappear quickly.Two methods, "AUTO SETUP" and "OSM ™ Adjustment"are available for adjusting the screen. (For the "OSMAdjustment", see 5. OSM (On Screen Manager) FUNC-TIONS.) Conduct the "AUTO SETUP" first. And then, dothe "OSM Adjustment" if necessary.The “AUTO SETUP” is to adjust "CONTRAST", "HORI-ZONTAL POSITION", "VERTICAL POSITION", "CLOCK","CLOCK-PHASE" and "BLACK LEVEL" automatically.• "AUTO SETUP" function may not work well with somecomputer. In the case, conduct the "OSM Adjustment".• In case that the monitor is used with an interlace signalof resolution 1280 dots by 1024 lines, one line in the topor bottom of the screen is lost. This condition can notbe corrected by any adjustment.Conduct the "AUTO SETUP" according to the followingprocedure:1. Turn on the computer and monitor.If you don't recognize the icon on the screen, adjust“CLOCK” until you can, with using the "OSM Function".If you don't see the icon because of the screen shiftedto vertical or horizontal direction, adjust "VERTICALPOSITION" or "HORIZONTAL POSITION" until youcan, with using the "OSM Function".2. Select "AUTO SETUP" at the OSM menu.( P1-10)In case that the screen area has a black back groundlike "MS-DOS PROMPT", the "AUTO SETUP" may notwork well.3. Press "+" button. Then, the "AUTO SETUP" start.During the "AUTO SETUP", "AUTO SETUP" is dis-played on the screen and when it finishes, "AUTOSETUP" disappear from the screen. "AUTO SETUP"takes approx. 10 secs to finish.In case that the monitor is used with an interlace signal,one line in the top or bottom of the screen is lost as aresult of the "AUTO SETUP". In the case, adjust the"VERTICAL POSITION" by the "OSM Adjustment".44 AUTO SETUPFUNCTION 55 OSM(On Screen Man-ager) FUNCTIONS