NEC MULTISYNC LCD1800TM User Manual

Also see for MultiSync LCD1800: Specifications User guide Brochure & specs Product dimensions

Contents

NEC MULTISYNC LCD1800TM User Manual Manual pdf 14 page image

- 1-11 -ENGLISHTo choose the language used on OSM.ENG...English, DEU...German, ESP...Spanish,FRA...French, ITA...Italian, JPN...JapaneseTo select the constantpower mode.To select the powersave mode.To restore to the fac-tory preset mode.1. Press the right of select button and minus of adjustbutton together, the "CONTROL LOCK" screen ap-pears.2. Press the plus button to lock on the OSMTM. Duringthe Locked condition, "Key mark " is indicatedon the upper-right of the OSM screen and "BRIGHT-NESS" is only adjustable.A/B signal change and OSD OFF by front SW arefunctionable.3. Press the minus button to lock off the OSM, and if youpress any select or adjust button, Key mark isdisappeared from the OSD screen. You can operateOSM, again.5.2 CONTROL LOCK Mode OperationADJUST- +ADJUST- +SELECT ADJUSTPress and buttons together, to restore to the factory preset level.Press "ALL RESET" to restore to the factory preset level.GroupIcon Press the Minus Button: Press the Plus Button:ItemIcon ItemSet data by each timing.Set data does not change by the changing of the signal timing.Factory PresetsUser PresetsALL RESETOSD POSITIONPOWER SAVEAUTO SELECTCLAMP PULSE POSITIONLANGUAGETo eliminate an excessive green or white-background that may occur when both Sync-On-Greenand external sync signals are applied to the moni-tor.To clamp the video sig-nal at the front of the H-Sync pulse.To clamp the video sig-nal at the back of the H-Sync pulse. If you con-n e c t t o a n o l d e rMacintosh, you mayneed to press plus but-ton.To off the Auto Adjust-ment Function.To on the Auto SelectFunction.To move the OSD position for 5 places.

/ 17

Related manuals for NEC MultiSync LCD1800