NEC MULTISYNC X461S User Manual

Also see for MultiSync X461S: Specifications Control guide Manual Manual Specifications

NEC MULTISYNC X461S User Manual Manual pdf 16 page image

English-14ConnectionsNOTE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in aloss of the monitor image.NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound.Before making connections:* First turn off the power of all the attached equipment and make connections.* Refer to the user manual included with each separate piece of equipment.Wiring Diagram Solid lines = video signalDotted lines = audio signalDVD playerwith HDMI out DVD playerVCR orDVD PlayerStereo AmplifierSecond monitor*Computer (Analog) Computer (Digital)DVD player withSCART OUT*: Multiple monitors that are daisy-chained have a limit to the connectable monitors.ConnectedequipmentConnectingterminal Setting in Terminal Mode Input signal name ConnectingAudio terminalInput buttonin remote controlAVDVI (DVI-D) DVI MODE: DVI-HD DVI AUDIO IN1 DVIHDMI RAW/EXPAND*1 HDMI HDMI HDMIVGA (D-Sub) +VIDEO1 D-SUB MODE: SCART SCART AUDIO IN1 DVD/HDVIDEO1 (BNC) - VIDEO1 AUDIO IN1 VIDEOVGA (D-Sub) D-SUB MODE: S-VIDEO S-VIDEO AUDIO IN1 S-VIDEOVGA (D-Sub) D-SUB MODE: VIDEO VIDEO2 AUDIO IN1 VIDEOVGA (D-Sub) D-SUB MODE: COMPONENT DVD/HD2 AUDIO IN1 DVD/HDPCVGA (D-Sub) - VGA AUDIO IN1 VGADVI (DVI-D) DVI MODE: DVI-PC DVI AUDIO IN1 DVIDisplayPort - DPORT DPORT DISPLAYPORTHDMI RAW/EXPAND*1 HDMI HDMI HDMI*1: depend on signal type.