NEC MultiSync EA221WM User Manual

Also see for EA221WM-BK - MultiSync - 22" LCD Monitor: Specifications

Contents

English-12Image Controls (Analog input only)LEFT / RIGHTControls Horizontal Image Position within the display area of the LCD.DOWN / UPControls Vertical Image Position within the display area of the LCD.H.SIZEAdjusts the horizontal size by increasing or decreasing this setting.FINEImproves focus, clarity and image stability by increasing or decreasing this setting.Colour Control SystemColour Control System: Six colour presets select the desired colour setting (sRGB and NATIVE colour presets arestandard and cannot be changed).R,G,B: Increases or decreases Red, Green or Blue colour depending upon which is selected. The change in colourwill appear on screen and the direction (increase or decrease) will be shown by the bars.NATIVE: Original colour presented by the LCD panel that is unadjustable.sRGB: sRGB mode dramatically improves the colour fidelity in the desktop environment by a single standard RGBcolour space. With this colour supported environment, the operator could easily and confidently communicate colourwithout further colour management overhead in the most common situations.NOTE: When MOVIE, GAMING, or PHOTO is selected as the DV MODE, NATIVE is selected automatically as thesix colour preset and cannot be changed.ToolsVOLUME: Controls the volume of the speakers or headphones.To mute the speaker output, press the “RESET/DV MODE” button.EXPANSION: Selects the zoom mode.FULL: The image is expanded to 1680 x 1050, regardless of the resolution.ASPECT: The image is expanded without changing the aspect ratio.OFF TIMER: Monitor will automatically power-down when the end user has selected a predetermined amount oftime.INPUT RESOLUTION (Analog Input Only): Selects resolution’s priority of input signal to one of the following pair:1360 x 768, 1680 x 1050 or 1280 x 768, 1680 x 1050 or 1024 x 768, 1400 x 1050.1360 x 768, 1680 x 1050: Determines the resolution to 1360 x 768, 1680 x 1050.1280 x 768, 1680 x 1050: Determines the resolution to 1280 x 768, 1680 x 1050.1024 x 768, 1400 x 1050: Determines the resolution to 1024 x 768, 1400 x 1050.DDC/CI: This function allows the DDC/CI function ON or OFF.FACTORY PRESET: Selecting Factory Preset allows you to reset all OSD control settings back to the factorysettings. Individual settings can be reset by highlighting the control to be reset and pressing the RESET button.Menu ToolsLANGUAGE: OSD control menus are available in eight languages.OSD LEFT/RIGHT: You can choose where you would like the OSD control image to appear horizontally on yourscreen.OSD DOWN/UP: You can choose where you would like the OSD control image to appear vertically on your screen.OSD TURN OFF: The OSD control menu will stay on as long as it is in use. In the OSD Turn Off submenu, you canselect how long the monitor waits after the last touch of a button to shut off the OSD control menu.OSD LOCK OUT: This control completely locks out access to all OSD control functions without Brightness andContrast. When attempting to activate OSD controls while in the Lock Out mode, a screen will appear indicating theOSD controls are locked out. To activate the OSD Lock Out function, press SELECT, then right control button andhold down simultaneously. To deactivate the OSD Lock Out, press SELECT, then left control button and hold downsimultaneously while in the OSD menu.HOT KEY: You can adjust the brightness and volume directly. When this function is set to ON, you can adjust thebrightness with left or right control and volume with up or down control while the OSD menu is off.