NEC MultiSync EA221WM User Manual

Also see for EA221WM-BK - MultiSync - 22" LCD Monitor: Specifications

Contents

English-6Quick StartTo attach the MultiSync LCD monitor to your system, follow these instructions:1. Turn off the power to your computer.2. For the PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in yoursystem (Figure A.1). Tighten all screws.For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in yoursystem (Figure A.2). Tighten all screws.For the MAC: Connect the Macintosh cable adapter to the computer, then attach the 15-pin mini D-SUB signal cable tothe Macintosh cable adapter (Figure B.1). Tighten all screws.Figure A.1 Figure B.1MacintoshCable Adapter(not included)Figure A.2DVI signal cableFigure C.1aA TypeB TypeA TypeB TypeNOTE: Some Macintosh systems do not require a Macintosh cable adapter.3. Place hands on each side of the monitor to tilt the LCD panel 30-degree angle and lift up to the highest position(Figure C.1).4. Connect all cables to the appropriate connectors (Figure C.1). Connect the Headphone (not included) to the appropriateconnector at the left side of the monitor (Figure C.1). When using the USB cable, connect the B type connector to theUSB upstream port on the right back side of the monitor and the A type connector to the downstream port on the computer(Figure C.1a). If you can use the cord from the USB device, use one of the downstream ports on the side of the monitor.HighestStandPosition30˚ TiltFigure C.1Power CordD-SubDVIDVI CableHeadphoneUSBAudio Input