NEC MultiSync FE1250+ FE1250+ FE1250+ User Manual

Also see for MultiSync FE1250+: Dimensional drawing User manual

Contents

NEC MultiSync FE1250+ FE1250+ FE1250+ User Manual Manual pdf 12 page image

English-11EnglishSize and Position ControlsLeft/Right: Moves the image horizontally (left or right).Down/Up: Moves the image vertically (up or down).Narrow/Wide: Decreases or increases the horizontal size of the image.Short/Tall: Decreases or increases the vertical size of the image.Color Control/Color Control SystemColor presets 1 through 5 selects the desired color setting. The baris replaced by the color setting choice. Each color setting is adjustedat the factory to the stated Kelvin. If a setting is adjusted, the nameof the setting will change from Kelvin to Custom.Red, Green, Blue: AccuColor Control System decreases or increasesthe monitor’s red, green or blue color guns depending upon which isselected. The change in color will appear on screen and the direction(decrease or increase) will be shown by the bars.sRGB Mode: sRGB mode provides the suitable color managed pictureimage. You can not change Contrast, Brightness, Red, Green and Bluecolors individually.Geometry ControlsGeometry Controls MenuThe Geometry controls allow you to adjust the curvature or angle of thesides of your display.Sides In/Out (pincushion): Decreases or increases the curvature ofthe sides either inward or outward.Sides Left/Right (pincushion balance): Decreases or increases thecurvature of the sides either to the left or right.Sides Tilt (parallelogram): Decreases or increases the tilt of the sideseither to the left or right.Sides Align (trapezoidal): Decreases or increases the bottom of thescreen to be the same as the top.Rotate (raster rotation): Rotates the entire display clockwise orcounterclockwise.