NEC MultiSync FE1250+ FE1250+ FE1250+ User Manual

Also see for MultiSync FE1250+: Dimensional drawing User manual

Contents

NEC MultiSync FE1250+ FE1250+ FE1250+ User Manual Manual pdf 9 page image

English-8Quick StartTo attach the MultiSync FE1250+ monitor to your system, follow theseinstructions:1. Turn off the power to your computer.2. If necessary, install the display card into your system. For moreinformation, refer to the display card manual.3. For the PC: Connect the 15-pin mini D-SUB of the captive signalcable to the connector of the display card in your system(Figure A.1). Tighten all screws.For the Mac: Connect the Macintosh cable adapter (not included) tothe monitor connector on the Macintosh (Figure B.1). Attach the15-pin mini D-SUB end of the captive signal cable to the Macintoshcable adapter on the computer (Figure B.1). Tighten all screws.4. The Windows® 95/98/2000 INF file for your MultiSync monitor can befound on the CD-ROM, delivered with the monitor.5. Connect one end of the power cord to the MultiSync FE1250+monitor and the other end to the power outlet (Figure C.1).6. Turn on the monitor (Figure D.1) and the computer.NOTE: If you have any problems, please refer to theTroubleshooting section of this User’s Manual.Captive Signal Cable15-pin mini D-SUBFigure A.1