NEC MultiSync LCD1770GX User Manual

Also see for LCD1770GX-BK: Specifications Specifications

NEC MultiSync LCD1770GX User Manual Manual pdf 12 page image

10Controls –continuedAccuColor® Control SystemsAccuColor® Control Systems: Six color presets select the desired color setting (sRGBand NATIVE color presets are standard and cannot be changed).R,G,B: Increases or decreases Red, Green or Blue color depending upon which isselected. The change in color will appear on screen and the adjustment (increaseor decrease) will be shown by the bars.NATIVE: Original color presented by the LCD panel that is unadjustable.sRGB: sRGB mode dramatically improves the color fidelity in the desktopenvironment by using a single standard RGB color space. With this color sup-ported environment, the operator could easily and confidently communicate colorwithout further color management overhead in the most common situations.ToolsOFF TIMER: Monitor will automatically power-down when the end user has selecteda predetermined amount of time.HOT KEY: You can adjust the brightness and contrast directly. When this function isset to ON, you can adjust the brightness with left or right control and contrast withup or down control while the OSM menu is off.FACTORY PRESET: Selecting Factory Preset allows you to reset all OSM controlsettings back to the factory settings. The RESET button will need to be held downfor several seconds to take effect. Individual settings can be reset by highlightingthe control to be reset and pressing the RESET button.Menu ToolsLANGUAGE: OSM ® control menus are available in eight languages.OSM LEFT/RIGHT: You can choose where you would like the OSM controlimage to appear horizontally on your screen.OSM DOWN/UP: You can choose where you would like the OSM control image toappear vertically on your screen.OSM TURN OFF: The OSM control menu will stay on as long as it is in use. In theOSM Turn Off submenu, you can select how long the monitor waits after the lasttouch of a button to shut off the OSM control menu.OSM LOCK OUT: This control completely locks out access to all OSM controlfunctions except Brightness and Contrast. When attempting to activate OSMcontrols while in the Lock Out mode, a screen will appear indicating the OSMcontrols are locked out. To activate the OSM Lock Out function, press SELECT,then right control button and hold down simultaneously. To deactivate the OSMLock Out, press SELECT, then left control button and hold down simultaneouslywhile in the OSM menu.LCD1770GXManual011305.pmd 1/14/05, 5:04 PM10