NEC MultiSync LCD1810X User Manual

Also see for LCD1810X-BK - MultiSync 18" Ambix Digital: Dimensions

NEC MultiSync LCD1810X User Manual Manual pdf 9 page image

2-in7Quick Start cont.Tilt and SwivelGrasp both sides of the monitor screenwith your hands and adjust the tilt andswivel as desired (Figure TS.1).Remove Monitor Stand forMountingTo prepare the monitor for alternate mount-ing purposes:1. Disconnect all cables.2. Place hands on each side ofthe monitor and lift up to the highest position (Figure RL.1).3. Place monitor face down on a non-abrasive surface. (Place the screen ona 2-inch platform so that the stand is parallel with the surface.)(Figure S.1)4. Remove the stand cover by sliding the top/bottom pieces off the stand(Figure S.2). Remove the 4 screws connecting the monitor to the standand lift off the stand assembly (Figure S.3). The monitor is now ready formounting in an alternate manner.5. Reverse this process to reattach stand.NOTE: Use only VESA-compatible alternative mounting method.1234Figure S.2 and Figure S.3Figure S.1Figure TS.1Caution: This LCD monitor is designed for use with a flexible arm, therefore it is delivered without stand.To fulfil the safety requirements the monitor must be mounted to an arm which guarantiesthe necessary stability under consideration of the weight of the monitor.The LCD monitor shall only be used with an approved arm (e.g. GS mark).CN912A/LCD1810X/78135311 00.3.13, 4:11 PM9