OSM™ (On-Screen Manager) control buttons on the front of themonitor function as follows:To access OSM menu, press any of the control buttons ( , , –, +).To change DVI/D-SUB signal input, press the NEXT button.To rotate OSM between Landscape and Portrait modes, press the RESET button.NOTE: OSM must be closed in order to change signal input and rotate.MenuEXIT Exits the OSM controls.Exits to the OSM main menu.CONTROL / Moves the highlighted area left/right to select control menus.Moves the highlighted area up/down to select one of the controls.ADJUST –/+ Moves the bar left/right to increase or decrease the adjustment.Active Auto Adjust function.Enter the Sub Menu.NEXT Moves the highlighted area of main menu right to select one of the controls.RESET Resets the highlighted control menu to the factory setting.Resets the highlighted control to the factory setting.NOTE: When RESET is pressed in the main and sub-menu, a warning window will appearallowing you to cancel the RESET function by pressing the EXIT button.Brightness/Contrast ControlsBRIGHTNESSAdjusts the overall image and background screen brightness.CONTRASTAdjusts the image brightness in relation to the background.AUTO ADJUST (Analog input only)Adjusts the image displayed for non-standard video inputs.Auto Adjust (Analog input only)Automatically adjusts the Image Position and H. Size settings and Fine settings.Position Controls (Analog input only)LEFT / RIGHTControls Horizontal Image Position within the display area of the LCD.DOWN / UPControls Vertical Image Position within the display area of the LCD.H.SIZEAdjusts the horizontal size by increasing or decreasing this setting.FINEImproves focus, clarity and image stability by increasing or decreasing this setting.7ControlsAUTO01.4.2, 5:03 PM9