NEC MultiSync LCD1850X User Manual

Contents

NEC MultiSync LCD1850X User Manual Manual pdf 17 page image

English-6Raise and Lower Monitor ScreenThe monitor may be raised or lowered in either Portrait orLandscape mode.To raise or lower screen, place hands on each side of the monitor andlift or lower to the desired height (Figure RL.1).Screen RotationBefore rotating, the screen must be raised to the highest level to avoidknocking the screen on the desk or pinching your fingers.To raise the screen, place hands on each side of the monitor and lift upto the highest position (Figure RL.1).To rotate screen, place hands on each side of the monitor screen andturn clockwise from Landscape to Portrait or counter-clockwise fromPortrait to Landscape (Figure R.1).To toggle the orientation of the OSM menu between Landscape andPortrait modes, press the RESET button while OSM menu is off.Tilt and SwivelGrasp both sides of the monitor screen with your hands and adjust thetilt and swivel as desired (Figure TS.1).Remove Monitor Stand for MountingTo prepare the monitor for alternate mounting purposes:1. Disconnect all cables.2. Place hands on each side of the monitor and lift up to thehighest position (Figure RL.1).3. Place monitor face down on a non-abrasive surface (Place thescreen on a 50 mm platform so that the stand is parallel with thesurface.) (Figure S.1).4. Press the “ ” portion with your index finger and at thesame time slide the lower stand cover. (Figure S.2)Next, lift up the stand, remove the lower stand cover, then go on toremove the upper stand cover. (Figure S.3)Return the stand to its original position, remove the 4 screws thatconnect the monitor to the stand, and lift off the stand assembly.(Figure S.4)01b_English 2/4/01, 3:39 pm6