EnglishEnglish-1DeclarationDeclaration of the ManufacturerTO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOTUSE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESSTHE PRONGS CAN BE FULLY INSERTED.REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFERSERVICING TO QUALIFIED SERVICE PERSONNEL.WARNINGCAUTIONCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to causeelectric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.This symbol alerts the user that important literature concerning the operation and maintenance of this unithas been included. Therefore, it should be read carefully in order to avoid any problems.We hereby certify that the colour monitorMultiSync LCD1860NX (L182R4)is in compliance withCouncil Directive 73/23/EEC:– EN 60950Council Directive 89/336/EEC:– EN 55022– EN 61000-3-2– EN 61000-3-3– EN 55024and marked withNEC-Mitsubishi Electric VisualSystems Corporation4-13-23, Shibaura,Minato-KuTokyo 108-0023, JapanCaution:When operating the MultiSync LCD1860NX with a 220-240V AC power source in Europe, use the power cord provided withthe monitor.In the UK, a BS approved power cord with a moulded plug has a Black (five Amps) fuse installed for use with this equipment.If a power cord is not supplied with this equipment please contact your supplier.When operating the MultiSync LCD1860NX with a 220-240V AC power source in Australia, use the power cord provided withthe monitor.For all other cases, use a power cord that matches the AC voltage of the power outlet and has been approved by andcomplies with the safety standard of your particular country.