NEC MultiSync LCD1860NX User Manual

Also see for NEC MultiSync LCD1860NX LCD1860NX LCD1860NX: Brochure & specs User manual Dimensions User manual

Contents

English-8FINE (Analog input only)Improves focus, clarity and image stability by increasing or decreasing this setting.Should the “Auto Adjust function” and the “H.Size” function do not give you a satisfactory picture setting, afine tuning can be performed using the “Fine” function. It improves focus, clearity and image stability byincreasing or decreasing this setting.For this a Moiré test pattern could be used. If the Fine value is wrongly calibrated, the result would look likeon the left drawing. The image should be homogeneous.AccuColor Control Systems (Color Control Systems)AccuColor Control Systems: Six colour presets select the desired colour setting. Colour temperatureincreases or decreases in each preset. (NATIVE and sRGB colour preset cannot be changed.)NATIVE: Original colour presented by the LCD panel that is unadjustable.Tools 1SHARPNESS: This function is digitally capable to keep crisp image at any timings. It is continuouslyadjustable to get distinct image or soft one as you prefer, and set independently by different timings.The number of adjustment steps is different depending on whether EXPANSION Mode is OFF, FULL orASPECT (1280 x 1024 is OFF Mode).EXPANSION MODE: Sets the zoom method.FULL: The image is expanded to 1280 x 1024, regardless of the resolution.ASPECT: The image is expanded without changing the aspect ratio.OFF: The image is not expanded.CUSTOM: Select one of the expansion rates from 1.0 to 3.0 times individually at horizontal andvertical. This mode is for use with special video cards.RESOLUTION NOTIFIER: This optimal resolution is 1280 x 1024. If ON is selected, a message will appearon the screen after 30 seconds, notifying you that the resolution is not at 1280 x 1024.VIDEO DETECT: Selects the method of video detection when more than one computer is connected.FIRST DETECT: The video input has to be switched to “FIRST DETECT” mode. When current videoinput signal is not present, then the monitor searches for a video signal from the other video input port.If the video signal is present in the other port, then the monitor switches the video source input port tothe new found video source automatically. The monitor will not look for other video signals while thecurrent video source is present.LAST DETECT: The video input has to be switched to the “LAST DETECT” mode. When the monitor isdisplaying a signal from the current source and a new secondary source is supplied to the monitor,then the monitor will automatically switch to the new video source. When current video input signal isnot present, then the monitor searches for a video signal from the other video input port. If the videosignal is present in the other port, then the monitor switches the video source input port to the newfound video source automatically.NONE: The Monitor will not search the other video input port unless the monitor is turned on.When FINE value iswrong.When FINE value iscorrect.