NEC MultiSync LT140 User Manual

Also see for LT180 - LT 180 XGA DLP Projector: Supplementary guide Control commands Command guide Command guide Control commands

NEC MultiSync LT140 User Manual Manual pdf 22 page image

E–22Video ModeGamma:Video ModeGammaNoise ReductionColor MatrixProjector OptionsMenuSetupMenuLanguageEnglishProjector PointerPointer 1Source DisplayOffOnYou can select one of the following three levels for reducing videonoise to your preference.NOTE: The lower the Noise Reduction level, the better the im-age quality by way of higher video bandwidth.Color MatrixProjector OptionsEnables you to set preferences and otheroperating options.MenuGammaNormal Natural 1 Natural 2Use the ß or © buttons to choose “Normal” when in a lightedroom and “Natural 1&2” when in a darkened room. “Natural 1”for better flesh tone; “Natural 2” for true reproduction of middletones.Each mode is recommnded for :Normal: TV programsNatural1: Movie such as an action filmNatural2: Movie with many dark scenesNOTE: A frame may freeze for a brief period of time when avideo is played back in fast-forward or fast-rewind with a Videoor S-Video source. If this happens, select the Natural 1 or 2 mode.Noise Reduction:Noise ReductionOff Low Medium HighColor MatrixSelect Color MatrixSDTVHDTVSelect Color Matrix TypeCb/CrB-Y/R-Y Pb/PrFirst select an appropriate color matrix to fit your componentsignal for HDTV or SDTV. Then select an appropriate matrixtype from B-Y/R-Y, Cb/Cr or Pb/Pr.NOTE: The Color Matrix feature is available for compositevideo, S-Video, and component signals only.Allows you to set preferences for the on-screen menu.Language:You can choose one of seven languages for on-screen instruc-tions. The options are: English, German, French, Italian, Span-ish, Swedish and Japanese.Projector Pointer:This enables you to select from eight different Pointer icons forthe “Pointer” button on your remote control.After moving your Pointer icon to the area you want on the screen,press the Magnify button on the remote control to enlarge theselected area on the screen.NOTE: There may be cases where the Pointer function is not avail-able for a non-interlace signal at 15kHz such as video game.Source Display:You can turn on and off the information for input name such asVIDEO and RGB.When this option is on, the current input will be displayed eachtime you switch sources or turn on the projector.