NEC MultiSync LT140 User Manual

Also see for LT180 - LT 180 XGA DLP Projector: Supplementary guide Control commands Command guide Command guide Control commands

NEC MultiSync LT140 User Manual Manual pdf 37 page image

E–376. SPECIFICATIONSThis section provides technical information about the MultiSync LT84/LT140 Projector’s performance.Model Number LT84 / LT84G / LT140 / LT140GOpticalDMD TM Single Chip Digital Micromirror Device(DMDTM ), 800x600 dots (LT84) / 1024x768 dots (LT140)Lens Manual zoom, manual focusLT84 : F3.0 – 3.3 f = 28 – 33 mmLT140 : F2.7 – 3.0 f = 35 – 42 mmLamp 120 W P-VIP lampImage Size 25 – 300 inches (612.5 – 7620 mm) diagonalProjection Distance 3.9 - 40 ft (1.2 - 12.2 m)ElectricalInputs Video (NTSC / PAL / PAL60 / SECAM / NTSC4.43)Horizontal Frequency : 15 – 85 kHz (RGB : 24 kHz or over)Vertical Frequency : 50 – 85 HzVideo Bandwidth RGB: 80 MHzColor Reproduction Full color, 16.7 million colors simultaneously.Horizontal Resolution 500 TV lines : NTSC / PAL / YCbCr300 TV lines : SECAMRGB LT84 : 800 dots horizontal, 600 dots verticalLT140 : 1024 dots horizontal, 768 dots verticalPower Requirement 100 – 120 / 200 – 240 VAC, 50 / 60 HzInput Current 2.1 A (100 – 120 VAC) / 1.0A (200 – 240 VAC)MechanicalDimensions 9.3" (W)22.3" (H)211.6" (D) / 235mm (W)258mm (H)2294mm (D) (not including protrusions)Net Weight LT84: 5.5 lbs / 2.5 kg, LT140: 5.7 lbs / 2.6 kgEnvironmental Considerations Operational Temperatures: 41˚ to 95˚F (5˚ to 35˚C), 30 to 85% humidityStorage Temperatures: 14˚ to 140˚F (-10˚ to 60˚C), 30 to 85% humidityRegulations UL Approved (UL 1950, CSA 950)Meets DOC Canada requirementsMeets FCC Class A requirementsMeets AS/NZS3548Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3)Meets Low Voltage Directive (EN60950, TUV GS Approved)Digital Light Proccessing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments.The specifications are subject to change without notice.