NEC MultiSync P221W User Manual

Also see for MultiSync P221W: Specification Specifications Technical specifications

Contents

NEC MultiSync P221W User Manual Manual pdf 11 page image

EnglishEnglish-9Figure S.14. Place one hand around the base and one hand on the Quick Release Lever. Move the Quick Release Lever in the directionindicated by the arrows (Figure S.2).5. Lift up the bottom of the stand to unhook it from the monitor (Figure S.3). The monitor can now be mounted using andalternate method. Reverse process to reattach stand.NOTE: Use only VESA-compatible alternative mounting method (100 mm pitch).NOTE: Handle with care when removing monitor stand.Figure S.2Flexible Arm InstallationThis LCD monitor is designed for use with a flexible arm.1. Follow the instructions on how Remove Monitor Stand forMounting to remove the stand.2. Change the 4 screws that were removed from the stand removal toattach the flexible arm to the monitor (Figure F.1).Caution: • When mounting, use ONLY the screws (4 pcs) that wereremoved from the stand to avoid damage to the monitoror stand.• The monitor should only be used with an approved arm(e.g. GS mark).• When using mounting accessories (e.g. VESA (100 x 100),use M4 size screws (Length: bracket thickness + 10mm).Recommended Fasten Force: 98 - 137N•cm.• To avoid blocking vent, keep adequate space above andbehind the monitor when using with flexible arm.NOTE: The mounting stand must be able to sustain at least 24.4 kgand be UL certified.Figure S.3Remove Monitor Stand for MountingTo prepare the monitor for alternate mounting purposes:1. Disconnect all cables.2. Place hands on each side of the monitor and lift up to the highest position.3. Place monitor face down on a non-abrasive surface (Figure S.1).100mm100mmFigure F.1UpSlideWeight of LCD assembly: 6.1 kg MAX