NEC MultiSync P221W User Manual

Also see for MultiSync P221W: Specification Specifications Technical specifications

Contents

NEC MultiSync P221W User Manual Manual pdf 5 page image

EnglishEnglish-3Recommended useSafety Precautions and MaintenanceFOR OPTIMUM PERFORMANCE, PLEASE NOTETHE FOLLOWING WHEN SETTING UP AND USINGTHE MULTISYNC LCD COLOUR MONITOR:• DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may exposeyou to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel.• Do not spill any liquids into the cabinet or use your monitor near water.• Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which can be harmfulor fatal or may cause electric shock, fire or equipment failure.• Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.• Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall, causing serious damage tothe monitor.• The power supply cord you use must have been approved by and comply with the safety standards of your country.(Type H05VV-F 3G 0.75mm 2 should be used in Europe).• In U.K, use a BS-approved power cord with molded plug having a black (5A) fuse installed for use with this monitor.• Do not place any objects onto the monitor and do not use the monitor outdoors.• The lamps in this product contain mercury. Please dispose according to state, local or federal law.• Do not bend, crimp or otherwise damage the power cord.• Do not use monitor in high temperatured, humid, dusty, or oily areas.• Do not cover vent on monitor.• Do not touch LCD panel surface while transporting, mounting and setting. Applying pressure on the LCD panel can causeserious damage.• To prevent damage to the LCD monitor caused by tipping over due to earthquakes or other shocks, make sure to installthe monitor in a stable location and take measures to prevent falling.Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the followingconditions:• When the power supply cord or plug is damaged.• If liquid has been spilled, or objects have fallen into the monitor.• If the monitor has been exposed to rain or water.• If the monitor has been dropped or the cabinet damaged.• If the monitor does not operate normally by following operating instructions.• If glass is broken, handle with care.• If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.• Allow adequate ventilation around the monitor so that heat can properly dissipate.Do not block ventilated openings or place the monitor near a radiator or other heatsources. Do not put anything on top of monitor.• The power cable connector is the primary means of detaching the system from the powersupply. The monitor should be installed close to a power outlet which is easily accessible.• Handle with care when transporting. Save packaging for transporting.• Carry the monitor holding the built-in handle and bottom frames of the monitor.• Do not carry holding only the stand.• Image Persistence: Please be aware that LCD Technology may experience a phenomenon known as Image Persistence.Image Persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen. UnlikeCRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long periodof time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image wasdisplayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should beturned off for one hour to erase the image.NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images andusing a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.CAUTION