NEC MultiSync P402 User Manual

Also see for MultiSync P402: Specifications Control guide Installation guide Setup manual Dimensional drawing

NEC MultiSync P402 User Manual Manual pdf 10 page image

English-8Terminal PanelInL/R(IN2)R(IN3)R, Cr/Pr(IN)G, Y, VIDEO(IN)B, Cb/Pb(IN)H(IN)V(IN) RL(IN3)Out Out Out In Out LL/R(IN1)InIn AC IN connectorConnects with the supplied power cord. Main Power SwitchOn/Off switch to turn main power ON/OFF. LAN port (RJ-45)LAN connection. See page 31. REMOTE IN/OUTUse the optional wired remote control by connecting it to yourmonitor.NOTE: When you use Remote IN/OUT, IR CONTROL in OSDmenu should be NORMAL.NOTE: Do not use this connector unless specifi ed. RS-232C (D-Sub 9 pin)IN connector: Connect RS-232C input from externalequipment such as a PC in order to control RS-232Cfunctions.OUT connector: Connect RS-232C output. To connectmultiple MultiSync monitors via RS-232C daisy Chain. DISPLAYPORT connectorIN connector: To input DisplayPort signals.OUT connector: To output DisplayPort signals.NOTE: DisplayPort connectors are for image only. No soundcomes out. DVI (DVI-D)IN connector: To input digital RGB signals from a computeror HDTV device having a digital RGB output.* This connector does not support analog input.OUT connector: To output the DVI signal from either DVI INor HDMI connection. To output the DVI signal from the HDMIconnection, the HDMI input must be selected.HDMI connectorTo input digital HDMI signals.VGA IN (mini D-Sub 15 pin)To input analog RGB signals from a personal computer orfrom other RGB equipment.RGB/HV IN [R, G, B, H, V] (BNC)*To input analog RGB signals or signals from other RGBequipment.This is also to connect equipment such as a DVD player,HDTV device and Set-Top-Box. Sync-on-Green signal can beconnected to the G connector.This input can be used with an RGB, DVD/HD or Videosource. Please select signal type in TERMINAL SETTING.VIDEO1 IN connector (BNC)*To input a composite video signal.VIDEO OUT connector (BNC)To output the composite video signal from the VIDEO INconnector. AUDIO OUTTo output the audio signal from the AUDIO IN 1, 2, 3 andHDMI to an external device (stereo receiver, amplifi er, etc.). S-VIDEO IN connector (Mini DIN 4 pin)To input the S-video (Y/C separate signal). AUDIO IN 1, 2, 3To input audio signal from external equipment such as acomputer, VCR or DVD player. EXTERNAL SPEAKER TERMINALTo output the audio signal from AUDIO 1, 2, 3 and HDMI.Red terminal is plus (+).Black terminal is minus (-).Note: This speaker terminal is for 15W + 15W (8 ohm)speaker.