NEC MultiSync P402 User Manual

Also see for MultiSync P402: Specifications Control guide Installation guide Setup manual Dimensional drawing

NEC MultiSync P402 User Manual Manual pdf 27 page image

English-25EnglishADVANCED OPTIONINPUT DETECT Selects the method of input detection the monitor uses when more than two input devices areconnected.NONENONE The Monitor will not search the other video input ports.FIRST DETECT When the current video input signal is not present, then the monitor searches for a video signalfrom the other video input port. If the video signal is present in the other port, then the monitorswitches the video source input port to the new found video source automatically.The monitor will not look for other video signals while the current video source is present.LAST DETECT When the monitor is displaying a signal from the current source and a new secondary sourceis supplied to the monitor, the monitor will automatically switch to the new video source. Whencurrent video input signal is not present, the monitor searches for a video signal from the othervideo input port. If the video signal is present in the other port, then the monitor switches thevideo source input port to the new found video source automatically.VIDEO DETECT DVD/HD, SCART, VIDEO1, VIDEO2 or S-VIDEO inputs will have priority over DVI, VGA,RGB/HV. When DVD/HD, SCART, VIDEO1, VIDEO2 or S-VIDEO input signal is present themonitor will change and keep to the DVD/HD, SCART, VIDEO1, VIDEO2 or S-VIDEO input.CUSTOM DETECT Set the priority of input signals.When CUSTOM DETECT is selected, monitor searches listed inputs only.INPUT CHANGE Sets input change speed.NOTE: When “QUICK” is selected, picture may be distorted when signal input is changed.This function should be chosen after all adjustment options have been made for the input.NORMALTERMINAL SETTINGDVI MODE Selects the kind of DVI-D equipment which is connected to the DVI input. Select “DVI-PC” whenPC or other computer equipment is connected. Select “DVI-HD” when DVD player, which hasDVI-D output, is connected.DVI-PCBNC MODE Selects the type of signal associated with the BNC input.RGB: Analog input (R, G, B, H, V)COMPONENT: Component (Y, Cb/Pb, Cr/Pr)SCART: SCART signalVIDEO: Composite video (VIDEO2)RGBHDMI SIGNAL RAW: Disable the expanded feature.EXPAND: Expand image contrast and increase detail in the dark and bright areas.EXPANDDEINTERLACE Selects the IP (Interlace to Progressive) conversion function.Note: For DVI input “DVI-HD” needs to be enabled in the DVI mode menu.ONON Converts interlaced signals to progressive. This is the default setting.OFF Disables IP conversion. This setting is best suited for motion pictures, but increases the risk ofimage retention.COLOR SYSTEMVIDEO1, VIDEO2, S-VIDEO inputs onlyThe selected Color System depends on the video format of the input signal. AUTOAUTO Automatically chooses Color System setting based on input signal.NTSCPALSECAM4.43 NTSCPAL-60