NEC MultiSync P403 User Manual

Also see for MultiSync P403: Manual Manual Specification User manual Specifications

Contents

English-11EnglishOperating Range for the RemoteControlPoints the top of the remote control toward the LCD monitor’sremote sensor during button operation.Uses the remote control within a distance of about 7 m (23 ft.)from remote control sensor or at a horizontal and verticalangle of within 30° within a distance of about 3.5 m (10 ft.).PIP (Picture In Picture) buttonON/OFF button: Toggle switches between PIP, POP,PICTURE BY PICTURE-ASPECT and PICTURE BYPICTURE-FULL. See page 22.INPUT button: Selects the “picture in picture” input signal.CHANGE button: Replaces to the main picture and subpicture.NOTE: Enable to change the sub picture size by pressingSET/POINT ZOOM button during PIP mode.For detail information, see “PIP (Picture in Picture) matrix” inpage 51.REMOTE ID buttonActivates REMOTE ID function.MTS button* 1button* 1Activates closed captioning.NOTE: VIDEO* 2, S-VIDEO*2 inputs only.*1: This button’s action depends on which option board you use.Refer to the option board’s manual for further information.*2: This function depends on which option board you use.Caution: Important, the remote controlsystem may not functionwhen direct sunlight or strongillumination strikes the remotecontrol sensor or when there isan object in the path.Handling the remote control• Do not subject to strong shock.• Do not allow water or other liquid to splashthe remote control. If the remote control getswet, wipe it dry immediately.• Avoid exposure to heat and steam.• Other than to install the batteries, do not open the remotecontrol.