NEC MultiSync P403 User Manual

Also see for MultiSync P403: Manual Manual Specification User manual Specifications

Contents

English-38Mail SettingClick “MAIL” on the left side of HOME.This option notifi es your computer of an error message via e-mail when using wired LAN. An error message notifi cation will besent when an error occurs in the monitor.ALERT MAIL Checking [ENABLE] will turn on the Alert Mail feature.Checking [DISABLE] will turn off the Alert Mail feature.STATUS MESSAGE Checking [ENABLE] will turn on the STATUS MESSAGE feature.Checking [DISABLE] will turn off the STATUS MESSAGE feature.SENDER’S ADDRESS Type in the senders address. Up to 60 alphanumeric and symbols characters can be used.SMTP SERVER Type in the SMTP server name to be connected to the monitor.Up to 60 alphanumeric characters can be used.RECIPIENT’SADDRESS 1 TO 3Type in your recipient’s address. Up to 60 alphanumeric and symbols characters can be used.AUTHENTICATIONMETHODThis selects the authentication method of the e-mail transmission.POP3 SERVER This specifi es the address of the POP3 server that is used in the authentication of the e-mail.USER NAME This sets the user name for logging into the authentication server when authentication is requiredfor the e-mail transmission. Up to 60 alphanumeric characters can be used.PASSWORD This sets the password for logging into the authentication server when authentication is required forthe e-mail transmission. Up to 60 alphanumeric characters can be used.TEST MAIL Click this button to send a test mail to check if your settings are correct.NOTE: • If you execute a test, you may not receive an Alert mail.Should this happen, check if the network settings are correct.• If you entered an incorrect address in a test, you may not receive an Alert mail.Should this happen, check if the Recipient’s Address is correct.TIP: For Control command diagram, please see fi le “External_Control.pdf” on the CD-ROM.