NEC MultiSync P701 User Manual

Also see for MultiSync P701: Specifications Installation and assembly Specifications Specifications Specifications

NEC MultiSync P701 User Manual Manual pdf 34 page image

English-32Preparation Before UseConnect the monitor to a commercially available LAN cable before engaging in browser operations.Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the settingmethod. Although the type of proxy server will be a factor, it is possible that items that have actually been set will not bedisplayed depending on the effectiveness of the cache, and the contents set from the browser may not be reflected inoperation. It is recommended that a proxy server not be used unless it is unavailable.Handling of the Address for Operation via a BrowserRegarding the actual address that is entered for the address or entered into the URL column when operation of the monitor isvia a browser, the host name can be used as it is when the host name corresponding to the IP address of the monitor hasbeen registered to the domain name server by a network administrator, or the host name corresponding to the IP address ofthe monitor has been set in the “HOSTS” file of the computer being used.Example 1: When the host name of the monitor has been set to “pd.nec.co.jp”, access is gained to the network setting byspecifyinghttp://pd.nec.co.jp/index.html for the address or the entry column of the URL.Example 2: When the IP address of the monitor is “192.168.73.1”, access is gained to the mail alert settings by specifyinghttp://192.168.73.1/index.html for the address or the entry column of the URL.Network Settingshttp:// /index.htmlEnabling this option automatically assigns an IP address to the monitor from your DHCP server.Disabling this option allows you to register the IP address or subnet mask number obtained fromyour network administrator.NOTE: The IP address of the monitor is required to change the network setting.The IP address will not be displayed on the Monitor’s menu.Consult your network administrator for the IP address when [ENABLE] is selected for[DHCP].Set your IP address of the network connected to the monitor when [DISABLE] is selected for[DHCP].Set your subnet mask number of the network connected to the monitor when [DISABLE] is selectedfor [DHCP].Set your default gateway of the network connected to the monitor when [DISABLE] is selected for[DHCP].Set your primary DNS settings of the network connected to the monitor.Set your secondary DNS settings of the network connected to the monitor.Reflect your settings.NOTE: Close the browser after clicking [UPDATE].The monitor will automatically update your settings.DHCPIP ADDRESSSUBNET MASKDEFAULT GATEWAYDNS (PRIMARY)DNS (SECONDARY)UPDATE