NEC MultiSync PA242W User Manual

English-13EnglishFINE (Analog input only)*Improves focus, clarity and image stability by increasing or decreasing this setting.If the “AUTO ADJUST” function and the “H.SIZE” function do not give you a satisfactory picture setting, a fi ne tuningcan be performed using the “FINE” function.For this a Moiré test pattern could be used. If the FINE value is wrongly calibrated, the result would look like the leftdrawing. The image should be homogeneous.When FINE value iswrong.When FINE value iscorrect.AUTO FINE (Analog input only)*This function automatically and periodically adjusts the “FINE” setting for change in signal condition.This function adjusts approximately every 33 minutes.EXPANSIONSets the zoom method.FULL: The image is expanded to full screen, regardless of the resolution.ASPECT: The image is expanded without changing the aspect ratio.OFF: The image is not expanded.CUSTOM: Refer to the Advanced OSD menu for detailed instructions.SHARPNESSThis function is digitally capable of keeping crisp image at any time. It is continuously adjustable to get as distinct or assoft an image as your prefer and set independently by different timings.Color Control SystemsPICTURE MODEChange the Picture mode that is most suitable for the type of content that is shown. You can change up to 5 types.See Advanced menu Tag1 PICTURE MODE (page 18) and “Using the PICTURE MODE function” (page 17) for moreinformation.WHITEAdjust the white temperature by NATIVE or increasing or decreasing this setting. A lower color temperature will makethe screen reddish and a higher color temperature will make the screen bluish. NATIVE is a default color temperatureof LCD panel. 6500K is recommended for general graphic design and 5000K is recommended for print matching.ADJUSTHUE: Adjusts the hue of each color*1. The change in color will appear on screen and the menu color bars will show theamount of adjustment.OFFSET: Adjusts the color brightness of each color*1. Press “RIGHT” button and the color brightness increases.SATURATION: Adjusts the color depth of each color* 1. Press the “RIGHT” button and the color vividness increases.WHITE (White Balance): If TEMPERATURE needs further adjustment, the individual R/G/B levels of the white pointcan be adjusted. To adjust the R/G/B levels, CUSTOM must be showing as the TEMPERATURE selection.ADVANCED SETTINGShows ADVANCED MENU. See page 18 for detailed information. Set PICTURE MODE in detail in Advanced manualTag1.* Only for PA242W.*1 : RED, YELLOW, GREEN, CYAN, BLUE and MAGENTA.