English-9EnglishTerminal Panel AC IN connectorConnects with the supplied power cord. Main Power SwitchOn/Off switch to turn main power ON/OFF. LAN port (RJ-45)LAN connection. See page 32. REMOTE IN/OUTUse the optional wired remote control by connecting it to yourmonitor.NOTE: When you use Remote IN/OUT, IR CONTROL in OSDmenu should be NORMAL.NOTE: Do not use this connector unless specifi ed. RS-232C (D-Sub 9 pin)IN connector: Connect RS-232C input from externalequipment such as a PC in order to control RS-232Cfunctions.OUT connector: Connect RS-232C output. To connectmultiple MultiSync monitors via RS-232C daisy Chain. DISPLAYPORT connectorTo input DisplayPort signals. DVI connector (DVI-D)IN connector: To input digital RGB signals from a computeror HDTV device having a digital RGB output.* This connector does not support analog input.OUT connector: To output the DVI signal from either DVI INor HDMI connection. To output the DVI signal from the HDMIconnection, the HDMI input must be selected.HDMI connectorTo input digital HDMI signals.VGA IN (mini D-Sub 15 pin)To input analog RGB signals from a personal computer orfrom other RGB equipment. This input can be used with anRGB, COMPONENT, SCART, VIDEO or S-VIDEO source.Please select signal type in TERMINAL SETTING.See page 25.NOTE: When you use this connector for COMPONENT,SCART, VIDEO or S-VIDEO, please use a suitable signalcable. If you have any questions, please ask your dealer.VIDEO1 IN connector (BNC)To input a composite video signal.AUDIO IN 1To input audio signal from external equipment such as acomputer, VCR or DVD player.AUDIO OUTTo output the audio signal from the AUDIO IN 1, DPORT andHDMI to an external device (stereo receiver, amplifi er, etc.). Kensington LockFor security and theft prevention. Option board slotSlot 2 type accessories are available. Please contact yoursupplier for detailed information.NOTE: Please contact your supplier for available optionboard. Internal speaker

Declaration of conformity

Important Information

Safety Precautions, Maintenance & Recommended Use

Installation

Attaching Mounting Accessories

Parts Name and Functions

Terminal Panel

Wireless Remote Control

Operating Range for the Remote Control

Setup

Connections

Connecting a Personal Computer

Basic Operation

Power Indicator

Information OSD

OSD (On-Screen-Display) Controls

PICTURE

AUDIO

MULTI DISPLAY

DISPLAY PROTECTION

ADVANCED OPTION

Remote Control Function

Controlling the LCD monitor via RS-232C Remote Control

Controlling the LCD monitor via LAN Control

network settings

Features

Troubleshooting

Speciﬁ cations

Pin Assignment

Manufacturer's Recycling and Energy Information

NEC MultiSync V322 User Manual

I. Application

II. Preparation

III. Communication specification

Communication Format

Header block format (fixed length)

Message block format

Check code

Delimiter

Message type

Get parameter" reply

Set parameter

Set parameter" reply

Commands

Get Timing Report and Timing reply

NULL Message

IV. Control Commands

How to read the measurement value of the built-in temperature sensors

Operation Code (OP code) Table

Power control procedure

Power control

Asset Data read and write

Asset Data write

Date & Time read and write

Date & Time Write

Schedule read and write

Schedule Write

Self diagnosis

Serial No. & Model Name Read

Model Name Read

Security Lock

Direct TV Chanel Read & Write

Direct TV Chanel Write & Reply

MultiSync V322

V322-AVT