NEC MultiSync V322 User Manual

Also see for MultiSync V322: Manual Manual Specifications Dimensional drawing Specifications

NEC MultiSync V322 User Manual Manual pdf 32 page image

English-30This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.NOTE: When you use this function, EXTERNAL CONTROL should be “RS-232C” (See page 23).Functions that can be controlled by a personal computer are:• Power ON or OFF• Switching between input signalsConnectionLCD Monitor + PCRS-232C CablePC(Out)RS-232C CableRS-232C (OUT)MultiSyncRS-232C (IN)RS-232C (OUT)RS-232C (IN)INOUTMultiSync MultiSyncNOTE: If your PC is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required. Contact yourdealer for details.Check the “ID=ALL REPLY” setting in “EXTERNAL CONTROL”.* In order to function, the RS-232C OUT terminal can only be connected to another monitor of the same model.Do not connect to other types of equipment.To control monitor or multiple monitors that are daisy-chained together please use the control command. Instructions for thecontrol command can be found on the CD included with the display. The fi le is called “External_control.pdf”.Multiple monitors that are daisy-chained have a limit to the conectable monitor.1) InterfacePROTOCOL RS-232CBAUD RATE 9600 [bps]DATA LENGTH 8 [bits]PARITY BIT NONESTOP BIT 1 [bit]FLOW CONTROL NONEThis LCD monitor uses RXD, TXD and GND lines for RS-232C control.The reverse type cable (null modem cable) (not include) should be used for RS-232C control.Controlling the LCD monitor via RS-232C Remote Control