NEC MultiSync X431BT User Manual

Also see for MultiSync X431BT: Installation and assembly Specifications Installation guide Specifications User configuration guide

NEC MultiSync X431BT User Manual Manual pdf 25 page image

English-23EnglishOSD TRANSPARENCY Set the transparency level of the OSD. TYPE2OFFTYPE1TYPE2OSD ROTATION This function does not operate in X431BT. -LANDSCAPEPORTRAITINPUT NAME You can set currently displayed INPUT name as you like. -Max: 8 characters, including Space, A-Z, 0-9, and some symbols.CLOSED CAPTION This function does not operate in X431BT. -OSD RESET Resets the following settings within the OSD menu back to factory setting: -OSD TURN OFF, OSD POSITION, INFORMATION OSD, OSD TRANSPARENCY.MONITOR ID Sets the monitor ID number from 1-100 and group ID from A-J. 1NOTE: Group ID is made of multiple selections.IR CONTROL Selects the mode of the monitor for use with the infra-red remote control when using the NORMALRS-232C daisy chain.NORMAL The monitor will be controlled normally by wireless remote controller.PRIMARY Choose “PRIMARY” for the first monitor within an RS-232C daisy chain.SECONDARY Choose “SECONDARY” for all subsequent monitors within an RS-232C daisy chain.LOCK Prevents the monitor from being controlled by wireless remote controller. To return to normaloperation, press the “DISPLAY” button on the remote controller for 5 seconds.TILE MATRIX Allows one image to be expanded and displayed over multiple screens (up to 100) through adistribution amplifier.NOTE: Low resolution is not suitable for tiling to a large number of monitors. You can operatewithout a distribution amplifier at the lower number of screens.H MONITORS Number of monitors arranged horizontally. 1V MONITORS Number of monitors arranged vertically. 1POSITION Select which section of the tiled image to be displayed on the monitor. 1TILE COMP Turns the TILE COMP feature on. NOENABLE Enables Tile Matrix. NOPOWER ON DELAY Adjusts the delay time between being in “standby” mode and entering “power on” mode. 0 Sec.“POWER ON DELAY” can be set between 0 and 50 seconds.POWER INDICATOR Turns ON or OFF the LED located at the front of the monitor. ONIf “OFF” is selected, LED will not light when the LCD monitor is in active mode.EXTERNAL CONTROL RS-232CCONTROL Selects the control interface, RS-232C or LAN.LAN RESET Resets the LAN settings.SETTING COPY In daisy chain condition, set the OSD menu categories which copy from current monitor to NOothers. NOTE: When you use this function, EXTERNAL CONTROL should be “RS-232C”.This function resets to default when power is off. This function has a limit depending on thecable you use.COPY START Select “YES” and press SET button to start copy.ALL INPUT When you check this item, copy to all input teminals. Default is off.MULTI DISPLAY RESET Resets “MULTI DISPLAY” options back to factory settings. -MULTI DISPLAY