NEC MultiSync X431BT User Manual

Also see for MultiSync X431BT: Installation and assembly Specifications Installation guide Specifications User configuration guide

NEC MultiSync X431BT User Manual Manual pdf 9 page image

English-7EnglishEXIT buttonActivates the OSD menu when the OSD menu is turned-off.Acts as EXIT button within the OSD to move to previousmenu.Remote control sensor and Power IndicatorReceives the signal from the remote control (when using thewireless remote control). See also page 11.Glows green when the LCD monitor is in active mode*.Glows red when the LCD is in POWER OFF (ECO standby)mode. Glows amber when the LCD is in POWER OFF(standby) mode. Blinks amber when the monitor is in PowerSave Mode. Green and Amber blink alternately while inPower Standby mode with the “SCHEDULE SETTINGS”function enabled. When a component failure is detectedwithin the monitor, the indicator will blink red.* If “OFF” is selected in “POWER INDICATOR” (see page 23),LED will not light when the LCD monitor is in active mode.AMBIENT LIGHT SENSORDetects the level of ambient light, allowing the monitor tomake automatic adjustments to the brightness setting,resulting in a more comfortable viewing experience. Do notcover this sensor. See page 18.Control Key Lock ModeThis control completely locks out access to all Control Keyfunctions. To activate the control key lock function, press bothand and hold down simultaneously for more than3 seconds. To resume user mode, press both and andhold simultaneously for more than 3 seconds.*: The product you purchased may not have this feature.POWER buttonSwitches the power on/off. See also page 16.MUTE buttonSwitches the audio mute ON/OFF.INPUT buttonActs as SET button within OSD menu. (Toggle switchesbetween [DVI], [DPORT], [VGA], [RGB/HV], [HDMI],[DVD/HD1], [DVD/HD2], [SCART], [VIDEO1], [VIDEO2],[S-VIDEO] or [TV]*). These are available input only,shown as their factory preset name.PLUS buttonActs as (+) button to increase the adjustment with OSD menu.Increases the audio output level when the OSD menu isturned off.MINUS buttonActs as (-) button to decrease the adjustment with OSD menu.Decreases the audio output level when the OSD menu isturned off.UP buttonActivates the OSD menu when the OSD menu is turned-off.Acts as button to move the highlighted area up to selectadjustment items within OSD menu.DOWN buttonActivates the OSD menu when the OSD menu is turned-off.Acts as button to move the highlighted area down toselect adjustment items within OSD menu.Control PanelParts Name and Functions