NEC MultiSync X463UN User Manual

Also see for MultiSync X463UN: Specifications Control guide Manual Manual Installation guide

NEC MultiSync X463UN User Manual Manual pdf 4 page image

English-2Important InformationTO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOTUSE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THEPRONGS CAN BE FULLY INSERTED.REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.WARNINGCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROMWALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWERCORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTSINSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.This symbol warns user that uninsulated voltage within the unit may have suffi cient magnitude to cause electricshock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.This symbol alerts the user that important literature concerning the operation and maintenance of this unit hasbeen included. Therefore, it should be read carefully in order to avoid any problems.CAUTIONCAUTION: Please use the power cord provided with this monitor in accordance with the table below. If a power cord is notsupplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches theAC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.Plug Type North America EuropeanContinental U.K. Chinese JapanesePlug ShapeRegion U.S.A./Canada Taiwan EU (except U.K.) U.K. China JapanVoltage 120* 110* 230 230 220 100* When operating the MultiSync monitor with its AC 125-240V power supply, use a power supply cord that matches the powersupply voltage of the AC power outlet being used.NOTE: This product can only be serviced in the country where it was purchased.Use the power cord which has BSMI mark at both ends when you use this monitor in Taiwan.• The intended primary use of this product is as an Information Technical Equipment in an offi ce or domestic environment.• The product is intended to be connected to a computer and is not intended for the display of television broadcast signals.WarningThis is a class A product. In a domestic environment this product may cause radio interference inwhich case the user may be required to take adequate measures.