NEC MultiSync X463UN User Manual

Also see for MultiSync X463UN: Specifications Control guide Manual Manual Installation guide

NEC MultiSync X463UN User Manual Manual pdf 5 page image

English-3EnglishFOR OPTIMUM PERFORMANCE, PLEASE NOTE THEFOLLOWING WHEN SETTING UP AND USINGTHE MULTI-FUNCTION MONITOR:• DO NOT OPEN THE MONITOR. There are no userserviceable parts inside and opening or removing covers mayexpose you to dangerous shock hazards or other risks. Referall servicing to qualifi ed service personnel.• Do not spill any liquids into the cabinet or use your monitornear water.• Do not insert objects of any kind into the cabinet slots,as they may touch dangerous voltage points, which canbe harmful or fatal or may cause electric shock, fi re orequipment failure.• Do not place any heavy objects on the power cord.Damage to the cord may cause shock or fi re.• Do not place this product on a sloping or unstable cart, standor table, as the monitor may fall, causing serious damage tothe monitor.• Do not mount this product face up, face down or upside downfor an extended period of time as it may cause permanentdamage to the screen.• The power supply cord you use must have been approved byand comply with the safety standards of your country. (TypeH05VV-F 3G 1mm 2 should be used in Europe)• In UK, use a BS-approved power cord with molded plughaving a black (13A) fuse installed for use with this monitor.• Do not place any objects onto the monitor and do not use themonitor outdoors.• Do not bend, crimp or otherwise damage the power cord.• If glass is broken, handle with care.• Do not cover vent on monitor.• Do not use monitor in high temperature, humid, dusty, or oilyareas.• If monitor or glass is broken, do not come in contact with theliquid crystal and handle with care.• Allow adequate ventilation around the monitor, so that heatcan properly dissipate. Do not block ventilated openings orplace the monitor near a radiator or other heat sources.Do not put anything on top of the monitor.• The power cable connector is the primary means of detachingthe system from the power supply. The monitor should beinstalled close to a power outlet, which is easily accessible.• Do not move or mount this product by hanging a rope or wireto the backside handle.Do not mount or secure this product by using the backsidehandle. It may fall and cause personal injury.• Handle with care when transporting. Save packaging fortransporting.• If using the cooling fan continuously, it is recommended towipe holes clean a minimum of once a month.• Please clean the holes of back cabinet to reject dirt and dustat least once a year because of set reliability.• When using a LAN cable, do not connect to a peripheraldevice with wiring that might have excessive voltage.Connecting to a TV*• Cable distribution system should be grounded (earthed) inaccordance with ANSI/NFPA 70, the National Electrical Code(NEC), in particular Section 820.93, Grounding of OuterConductive Shield of a Coaxial Cable.• The screen of the coaxial cable is intended to be connectedto earth in the building installation.Immediately unplug your monitor from the wall outlet and referservicing to qualifi ed service personnel under the followingconditions:• When the power supply cord or plug is damaged.• If liquid has been spilled, or objects have fallen into the monitor.• If the monitor has been exposed to rain or water.• If the monitor has been dropped or the cabinet damaged.• If you notice any structural damage such as cracks orunnatural wobbling.• If the monitor does not operate normally by followingoperating instructions.Recommended Use• For optimum performance, allow 20 minutes for warm-up.• Rest your eyes periodically by focusing on an object at least5 feet away. Blink often.• Position the monitor at a 90° angle to windows and other lightsources to minimize glare and refl ections.• Clean the LCD monitor surface with a lint-free, non-abrasivecloth. Avoid using any cleaning solution or glass cleaner!• Adjust the monitor’s brightness, contrast and sharpnesscontrols to enhance readability.• Avoid displaying fi xed patterns on the monitor for longperiods of time to avoid image persistence (after imageeffects).• Get regular eye checkups.ErgonomicsTo realize the maximum ergonomic benefi ts, we recommend thefollowing:• Use the preset Size and Position controls with standardsignals.• Use the preset Color Setting.• Use non-interlaced signals.• Do not use primary color blue on a dark background, asit is diffi cult to see and may produce eye fatigue due toinsuffi cient contrast.Cleaning the LCD Panel• When the liquid crystal panel is dusty, please gently wipewith a soft cloth.• Please do not rub the LCD panel with hard material.• Please do not apply pressure to the LCD surface.• Please do not use OA cleaner as it will cause deterioration ordiscolor on the LCD surface.Cleaning the Cabinet• Unplug the power supply• Gently wipe the cabinet with a soft cloth• To clean the cabinet, dampen the cloth with a neutraldetergent and water, wipe the cabinet and follow with a drycloth.NOTE: DO NOT clean with benzene thinner, alkaline detergent,alcoholic system detergent, glass cleaner, wax, polishcleaner, soap powder, or insecticide. Rubber or vinylshould not be in contact with the cabinet for an extendedperiod of time. These types of fl uids and materials cancause the paint to deteriorate, crack or peel.Safety Precautions, Maintenance & Recommended Use* The product you purchased may not have this feature.