16123456123456123456123456123456123456 BASIC OPERATION.Picture ProjectionTo project a picture source, proceed as follows:1 Turn on the main power of the projector.• Press the POWER switch on the front panel to the ON position (I).2 Turn on the power of the connected equipment.3 Turn on the power of the projector.• Press the POWER ON button on the remote control or the POWER button on the rear panel.4 Select an input signal source by pressing one of the ten INPUT buttons on the remote control. You can also select a signal fromthe “INPUT SELECT” list.• See “INPUT SELECTION” on page 24 for more details.5 Adjust the picture and sound.• See pages 20 through 23 for more details.NOTE: The volume function works only with the ISS-6020/ISS-6020G Switcher.6 To turn off the power, press the POWER OFF button on the remote control or the POWER button on the rear panel.7 Press the POWER switch on the front panel to the OFF position (V) to turn off the main power of the projector.8 Last, turn off the connected equipment power.Front panel3 6POWERON OFFOPERATEPICTUREMUTESOUNDMUTE1 ABC 2 DEF 3 GHI4 JKL 5 MNO 6 PQR7 STU 8 VWX 9 YZ /10 ,.RBENDCTLDISPLAYSTATICNORMAL ENTERCAPTION4User remote control○ ○ ○ ○○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○ ○ ○ProjectorACAT OUT R/Cr G/Y B/Cb H/HV V S-VIDEO VIDEO OPTION REMOTE1 REMOTE2OUT ININPUT SELECT ENTERON/OFFINDICATOR IINPUT SELECT POWERRear panel36417