NEC MultiSync XG-1352 Operation Manual

Also see for MultiSync XG-1352: User manual Manual

NEC MultiSync XG-1352 Operation Manual Manual pdf 27 page image

27BASIC OPERATIONStatic Convergence AdjustmentAdjust for the red and blue CRTs to place their pattern on top of thegreen test pattern (center only).NOTE: The static convergence adjustment should be performed forR and B CRT. Carry out the adjustment after displaying an activeimage for 20 minutes or more.Proceed as follows:1 Press the OPERATE button.• The “OPERATE” menu is displayed.2 Use the CURSOR or button to highlight the “6/STATIC”line and then press ENTER to display the STATIC adjustmentscreen. You can also select the STATIC adjustment screendirectly by pressing the INPUT “6” button , or by pressing theSTATIC button on the remote control.• The CROSS-HAIR test pattern will be automatically displayed.3 Press the R or B button to display the pattern to be aligned withthe Green pattern (as used a reference color).• You can turn on or off each CRT beam (R and B) separately.4 Hold down the CTL button then select the CRT you wish toadjust with the R and B buttons.5 Align the center of the Red or the Blue pattern with the center ofthe Green pattern using the CURSOR buttons.• The CURSOR or button moves the pattern right or left.The CURSOR or button moves the pattern up or down.6 Repeat steps 3 to 5 for the other CRTs if necessary.7 To end this adjustment, press the END button.• Whenever the END button is pressed, the screen changes in thisorder:“OPERATE” menu → Source screen– O P E R A T E –1 / P I C T U R E2 / P O S I T I O N3 / S O U N D4 / I N P U T S E L E C T5 / S O U R C E I N F O6 / S T A T I C7 / C L O S E D C A P T I O N8 / T I M E R+ 1 0 %– 1 0 %VHC O N V E R G E N C E– S T A T I C –C R T – R –Red or BlueGreen