[Admin Settings]3-76Changed settingsFor increased security, the following settings are set when enhanced securitysettings are applied." A changed setting cannot be changed when [Enhanced SecurityMode] is set to [OFF]." If password rules have been applied, a password that does not meetthe conditions of the password rules is considered a failed attemptduring authentication.*1 Set to [AES/3DES] when [Enhanced Security Mode] is set to [OFF].Administrator mode parameters Changed settings[Security Settings] - [Security Details]- [Password Rules]Set to [ON].[Security] tab in PageScope WebConnection - [Authentication Setting]- [General Settings] - [Public Access]Set to [Restrict].[Security] tab in PageScope WebConnection - [PKI Settings] - [SSL/TLS Settings] - [SSL/TLS]Set to [Enable].[Security] tab in PageScope WebConnection - [PKI Settings] - [SSL/TLS Settings] - [Encryption Strength]Set to [AES-256] or [AES-256,3DES-168]. *1[Network] tab in PageScope WebConnection - [E-mail Settings] -[S/MIME] - [E-mail Text EncryptionMethod]Set to [3DES], [AES-128], [AES-192]or [AES-256]. *1[Network] tab in PageScope WebConnection - [FTP Settings] - [FTPServer Settings] - [FTP Server]Set to [Disable].[Network] tab in PageScope WebConnection - [SNMP Settings] -[SNMP v1/v2c Settings] - [Write]Set to [Disable].[Network] tab in PageScope WebConnection - [SNMP Settings] -[SNMP v3 Settings] - [Write UserName] - [Security Level], [auth-pass-word] and [priv-password]Set to [Auth-password/Priv-pass-word].[Security Settings] - [Security Details]- [Registering and Changing Addr.]Set to [Restrict].
