Specifying destinations 10-153 Select the destination, and then press [OK]." To specify multiple destinations, specify all destinations where thedata is to be sent.Selecting by searching for a destination type or nameDestinations can be selected by searching for their type or name.1 In the initial Scan to E-mail mode screen, press .2 Press [Search].3 Select the method to search for destinations.– [Type]: Select the destination type (“Fax”, “E-mail”, etc.).– [Name]: Directly enter the name of the destination to be searched for.Type in the name to be searched for, and then press [OK] to display alist of the search results.4 Select the destination, and then press [OK].– To specify multiple destinations, select all destinations where the datais to be sent.5 Press [OK].Directly typing in the addressTo specify a destination that is not registered with the machine, directly typein the address.1 In the initial Scan to E-mail mode screen, press [Direct Input].2 Press [E-mail].3 Type in the E-mail address.4 Press [OK]." To specify multiple destinations, specify all destinations where thedata is to be sent." If [Admin Settings] - [Security Settings] - [Security Details] - [ManualDestination Input] is set to [Restrict], an address cannot be directlytyped in. For details on [Manual Destination Input], refer to “[SecuritySettings]” on page 3-70.Selecting from the logA destination can be selected from the log of the last five transmissions.1 In the initial Scan to E-mail mode screen, press [Log].
