N6305‘s usermanual第 33 页♦ Only CSD: only use CSDCSD setting: modify CSD connection setting, select desired setting and press select toaccess the related window:♦Connect type :to set connect type ,allow to select ISDN ananalogue ;♦ Dial-up number: dial it and access to network♦ User name: user name of network♦ password: user password of networkGPRS setting: modify CSD connection setting, select desired setting and press select toaccess the window:♦APN: access point name of GPRS gateway♦ User name: user name of network♦ password: user password of networkDNS Setting :input the DNS address (is just the same with GPRS Mode).4.8 CalibrationWhen you fell the use the touch pen to touch the screen do not nicety ,please calibration the screen toinsure the screen make the right reaction .Do as the system clew .4.9 TTS settingSet this function ,in the idle screen ,long press ,the system will prompt time 、date etc. as voice ,alsocan read the message’s content as voice :1. Select “TTS setting ”into TTS set window ;2. Select “TTS state ” ,to set incoming call ,SMS,MMS,push message,alarm ,schedule andremind’s tone state;3. Select “TTS read” ,to set read SMS,read messagelist ,read missed calls ,read unreadmessage,time prompt ,date prompt and week prompt on or off ;4. Select “prompt tone ”,in to prompt setting window ,to set the prompt tone ;5. Select “prompt text” ,to set known number call,unknown call , known number message ,unknown number message.4.10 Reset4.10.1 Reset settingsThe option may resume all original factory values. After selecting the option, the mobile phone will promptyou “Are you sure to resume the factory setup”. When using the option, it do not clear the materials that youhave saved by yourself such as phone book, short message, and so on. You may only change the operatingenvironment setups of mobile phone such as selecting rings, scene mode, etc.4.10.2 Reset allThe option may resume all original factory values. But it will clear the materials you have saved such asphone book, short message, and so on. The detailed operation is the same as Resuming Setup.