Installing the Operating System with Express Setup 5-9INSTALLING THE WINDOWS SERVER 2003Express Setup proceeds the setup by specifying the necessary information on the wizard. You canalso save the setup information created on the wizard in a floppy disk as a setup file.NOTES: Prepare a floppy disk to use as Configuration Disk if you want tosave the parameters or use the drivers located on the "OEM-Diskfor Mass Storage Device" that ships with optional boards. Whenusing the floppy disk, the Express setup can continue the setupwithout specifying the parameters. The remote KVM console cannot use the mouse in Procedures 1-14. Operate on the keyboard.→ key: Used to move to the next screens.← key: Used to return to the previous screen.↑ ↓ key: Used to select a menu.F1 key: Displays help.ENTER key: Used to select [OK] or to decide each item.ESC key: Used to select [Cancel].1. Turn the power of peripheral device on, and then turn on the server.NOTES: Do not mount an MO device on your server during the Windowsinstallation. Do not connect the other hard disk drives except the drive that youwant to create as the Windows system drive. If you create multiple logical drives in your system, refer to"Reinstalling the operation system when multiple logical drivesexist" (Appendix E).2. Insert the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive of the server.3. Press Ctrl, Alt, and Delete to reboot from the NEC EXPRESSBUILDER.The system boots from the CD-ROM and NEC EXPRESSBUILDER starts.4. Click [Express Setup].IMPORTANT: Express Setup overwrites the contents of you hard disk.If you have data you want to keep, follow the directions on the screenin Express Setup.
