2-18 General DescriptionSTANDARD FEATURESHigh performance Expandability Intel Xeon Processor High-speed network interface(1000Mbps/100Mbps/10Mbps supported) High-speed disk access(SATA2/Serial Attached SCSI) High-speed memory access (DDR2-533or DDR2-667) One PCI EXPRESS (x8) bus One PCI-X (64-bit/100 MHz) bus Large memory of up to 48GB Hot-swap hard disk drive baysSATA 3.5”: up to 3 hard disk drivesSAS 3.5”: up to 3 hard disk drivesSAS 2.5”: up to 6 hard disk drives Up to two multi-processors are availablefor upgrade. One backup file bay USB2.0 interface (A USB-support driveris required.)High-reliability Many Available Features Graphic accelerator "ATI RADEON 7000"support El Torito Bootable CD-ROM (noemulation mode) format support POWER switch mask Software power-off Remote power-on feature AC-Link feature Consoleless featureSelf-diagnosis Remote Management Controller Memory monitoring feature (errorcorrection/error detection) CPU/memory degradation feature (logicalisolation of a failed device) Memory chipkill feature Memory mirroring/online spare memoryfeature Bus parity error detection Temperature detection Error notification Internal fan monitoring feature Internal voltage monitoring feature Redundant power supply (hot-swap) RoMB (RAID on mother board) Auto-rebuild feature (hot-swappable) BIOS password feature Mechanical security lock Redundant fans Power On Self-Test (POST) Test and Diagnosis (T&D)Management Utilities Easy and Fine Setup NEC ESMPRO NEC DianaScopeMaintenance Features Off-line Maintenance Utility Memory dump feature using the DUMPswitch NEC EXPRESSBUILDER (system setuputility) Configuration Parameter Diskette Creator SETUP (BIOS configuration utility) SoftwareRAID Setup Utility (OnboardRAID configuration utility)