NEC N8100-1793F User Manual

Also see for NEC Express5800 Series: User guide User guide User guide User guide Configuration guide

Contents

NEC N8100-1793F User Manual Manual pdf 138 page image

1. SpecificationsExpress5800/R120d-2M User’s Guide138Chapter 4 Appendix1. SpecificationsProduct name Express5800/R120d-2MN code N8100-1793FCPU CPU N8101-545FN8101-546FN8101-547FN8101-548FN8101-549FN8101-550FN8101-551FN8101-552FIntel® Xeon® processorE5-2609 E5-2630L E5-2640 E5-2643 E5-2650 E5-2650L E5-2670 E5-2690Clock speed 2.40GHz 2.00GHz 2.50GHz 3.30GHz 2.00GHz 1.80GHz 2.60GHz 2.90GHzStandard/Maximum 1/23rd cache 10M 15M 10M 20MNumber of cores (C) /Number of threads (T) (1CPU)4C/4T 6C/12T 4C/8T 8C/16TChipset Intel® C602-J chipsetMemory Standard/Maximum Not pre-installed / Unbuffered DIMM: 64GB (16x 4GB), Registered DIMM: 384GB (24x 16GB), LoadReduced DIMM: 768GB (24x 32GB)Memory module DDR3L-1333 Unbuffered DIMM (4GB), DDR3L-1600 Registered DIMM (2/4/8/16GB), DDR3L-1333Load Reduced DIMM (32GB)Maximum clock speed 1066MHz 1333MHz 1600MHzError check, correction ECC, x4 SDDC, Memory LockStep (x8 SDDC)Memory Sparing SupportedMemory Mirroring SupportedAuxiliarystoragedeviceDrive bay Standard –Maximum HDD: SATA 16TB (16x1TB), SAS 14.4TB (16x900GB), SSD: SATA 1.6TB (16x100GB),SAS 6.4TB (16x 400GB) (with optional HDD cage installed)Hot swap SupportedInterface level /RAID SystemSATA 6Gb/s: RAID 0/1/5/6/10/50/60 (Option)SAS 6Gb/s: RAID 0/1/5/6/10/50/60 (Option)Optical disk drive Internal / external drive (option)FDD Option: Flash FDD (1.44MB) *2Device bay 3.5-inch bay x 1ExpansionslotsSupported slot1 x PCI EXPRESS 3.0 (x8 lane, x16 socket) (Full height, 312 mm in length)2 x PCI EXPRESS 3.0 (x8 lane, x16 socket) (Full height, 220 mm in length)(One slot is required in 2-CPU configuration.)2 x PCI EXPRESS 3.0 (x4 lane, x8 socket) (Low profile, 220 mm in length)1 x PCI EXPRESS 3.0 (x8 lane, x8 socket) (Dedicated to RAID Controller)1 x PCI EXPRESS 3.0 (x8 lane, x8 socket) (Dedicated to LAN riser card)Graphics Chip / VideoRAM Management controller chip / 32 MBGraphic display /resolution 16,770,000 colors: 640 x 480, 800 x 600, 1,024 x 768, 1,280 x1,024Interface 9 x USB 2.0 (2 x Front, 4 x Rear, x 3 Internal), 2 x Analog RGB (Mini D-Sub15 pin, 1x Front, 1xRear),1 x Serial port (RS-232C compliant / D-Sub9 pin, Serial port A, 1 x Rear, optional port can be used(up to two ports in total),2 x 1000BASE-T LAN connector (1000BASE-T/100BASE-T/10BASE-T supported, RJ45, 2 x Rear),1 x Management LAN connector (100BASE-T / 10BASE-T supported, RJ45, 1 x Rear)Power supply Not preinstalled /450W or 800W or 1200W 80 Plus® Platinum compliant (bipolar grounded outlet) (hot-plug available)(Maximum: 2)100/200VAC±10%, 50/60HzRedundant power supply Supported (option, hot-plug available)Redundant fan Supported (option, hot-plug unavailable)External dimensions(width × depth × height)When power supply unit N8181-86 (450W) or N8181-87 (800W) is selected:448.0 mm x 735.0 mm x 87.2 mm (Front bezel, inner rails, projections are excluded)482.0 mm x 869.9 mm x 87.2 mm (Front bezel, inner rails, projections are included)When power supply unit N8181-88 (1000W) is selected:448.0 mm x 770.0 mm x 87.2 mm (Front bezel, inner rails, projections are excluded)482.0 mm x 869.9 mm x 87.2 mm (Front bezel, inner rails, projections are included)Weight (Standard/ Max.) 22kg / 33kg (Rails included)Power consumption(100V at maximumconfiguration)High-loadstate850VA /840W810VA /800W880VA /870W950VA /940W880VA /870W830VA /820W920VA /910W960VA /950W40°Cenvironment850VA /840W810VA /800W880VA /870W950VA /940W880VA /870W830VA /820W920VA /910W960VA /950WEnvironmentalrequirementsTemperature/Humidity(No condensation eitherwhen operating or whenstored)Operating 10 to 40C°20 to 80%10 to 35C°20 to 80%10 to 40C°20 to 80%10 to 35C°20 to 80%Storage–10 to 55C°20 to 80%

/ 140

Related manuals for NEC NEC Express5800 Series