NEC N820 Manual

Contents

NEC N820 Manual Manual pdf 45 page image

29Taking a pictureTaking a picture☛ With the standby screen displayed, press to activate the camera function.2 You can also activate the camera function by pressing 8, 0 and 1 from the standby screen.☛ Look into the camera view finder screen and adjust the camera position to place the target on the screen.☛ Hold the camera still, and press or the Side up key.☛ Check the picture. If successfully taken, press .☛ The picture is saved as a JPEG file in the Pictures folder (see page 48).2 The default file name for the picture is the date, month, year, hour, minute and second from the date and time settings of your phone.2 After taking a picture, pressing Softkey 2 will display a new MMS editor screen with the picture file attached.2 If a call comes in while you are checking or saving a photographed image, image storage is cancelled. When this occurs, the next time you select camera functiona message appears to say that you have an image that was not stored, allowing you to check and store the image.Using the light☛ With the camera view finder screen displayed, press Softkey 1 to turn the light on or off.2 Take care not to hold the light too close to your or other people’s eyes when the light is lit.Zoom☛ With the camera view finder screen displayed, press the ▲ or ▼ key to zoom in and out.Controlling brightness☛ With the camera view finder screen displayed, use the and keys to control the brightness level of the picture. The current brightness level is displayed onthe left of the status bar area.▼▼