NEC N820 Manual

Contents

NEC N820 Manual Manual pdf 61 page image

45, The PIN2 code is SIM card related and may only be available from your service provider.Changing your PIN2 code☛ With the Security screen displayed, press 1 and 2 to display the PIN2 change screen.☛ Key in the current code and press Softkey 1. You are prompted to enter the new code, and then to enter it again for confirmation.Security codeThe security code is used to unlock the PIM features.Changing your security code☛ With the Security screen displayed, press 1 and 3 to display the Security code screen.2 The default setting of the security code is “0000”.☛ Key in the current security code and press Softkey 1. You are prompted to enter the new code, and then to enter it again for confirmation.PIN activate☛ With the Security screen displayed, press 2 to display the PIN activate screen.☛ Press 1 to activate or 2 to deactivate PIN codes. You may be prompted to enter the PIN code.Phone lockWhile the Phone lock is active, you are only allowed to make emergency calls and to enter the security code. When the Phone lock is active, the Phone lock will bereleased only when the correct security code is entered. To activate/deactivate the Phone lock, use the following procedure.2 Upon power-up, you are prompted to enter the security code if the Phone lock was active when the phone was powered down.☛ With the Security screen displayed, press 3 to display the phone lock screen. You will be prompted to enter the security code.☛ Key in the code and press Softkey 1. The phone locked message will be displayed.☛ Press Softkey 1 to make an emergency call or Softkey 2 to unlock the function.☛ To unlock the function, you are prompted to enter the security code again and press Softkey 1.Bar callsThis feature allows you to bar the following type of calls made or received on your phone.• All outgoing (dialled) calls• International outgoing (dialled) calls• International outgoing (dialled) calls except to home• All incoming (received) calls